We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cat 7 Ethernet cable, two feet long, with shielded RJ45 connectors on both ends

Nippon Labs

Nippon Labs 60CAT7-2BK Cat 7 network ethernet cable 2 ft black

SKU CH-X083-DSVYB MPN 60CAT7-2BK

A shielded Cat 7 patch cable with 26 AWG copper conductors and gold-plated RJ45 connectors rated for 600 MHz transmission

  • TypeNetwork Ethernet Cables
  • Cat7
  • Connector ARJ45
  • Connector BRJ45
  • Length2 ft.
  • ColorBlack
  • Supports 600 MHz bandwidth for high-speed gigabit networks
  • Double shielded SSTP construction blocks crosstalk and system noise
  • 26 AWG pure copper conductors ensure reliable signal transmission
  • 50 micron gold-plated RJ45 contacts resist corrosion for lasting connectivity
  • UL and ETL verified TIA/EIA compliance with RoHS certification

What this cable is

This is a Category 7 shielded patch cable built with four individually shielded pairs inside an overall braided shield. It carries RJ45 connectors on both ends and is rated for transmission frequencies up to 600 MHz over 100 metres. The 26 AWG stranded pure copper conductors terminate in shielded plugs with 50 micron gold plated contacts. It meets TIA/EIA requirements verified by UL and ETL and is RoHS compliant.

Installation notes

The boot protects the latch during routing and the 2 ft length suits short runs between a wall plate and a device or between rack equipment. Shielded plugs require a compatible shielded jack to maintain the ground path; using an unshielded jack breaks the screening. The stranded conductors flex easily but should not be bent tighter than the cable diameter to avoid pair separation.

Who should buy this

Builders needing a short, fully shielded link for Gigabit Ethernet in electrically noisy environments will benefit from the SSTP construction and 600 MHz rating. Buyers who need longer horizontal runs, PoE power budgets beyond the conductor gauge, or unshielded UTP simplicity should look at other cable types.

Highlights

  • Supports 600 MHz bandwidth for high-speed gigabit networks
  • Double shielded SSTP construction blocks crosstalk and system noise
  • 26 AWG pure copper conductors ensure reliable signal transmission
  • 50 micron gold-plated RJ45 contacts resist corrosion for lasting connectivity
  • UL and ETL verified TIA/EIA compliance with RoHS certification

Specifications

BrandNippon Labs
Model60CAT7-2BK
TypeNetwork Ethernet Cables
Cat7
Connector ARJ45
Connector BRJ45
Length2 ft.
ColorBlack
ShieldedYes
Wire Gauge26 AWG
FeaturesCat.7 patch cable specifications require transmission frequencies of up to 600 MHz over 100 meters (328Ft) of fully shielded copper cabling.
Cat.7 cable consists of four individually shielded pairs inside an overall braided shield, also known as Shielded Twisted Pair Cable (SSTP), or S/FTP (Shielded Foil Twisted Pair).
Cat.7 features even more stringent specifications for crosstalk and system noise than Cat.6, and is designed specifically for Gigabit Ethernet applications.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant.
4-pair stranded pure copper wire 26AWG double shi
Shipping weight0.07 kg
Package size152 × 127 × 25 mm

Questions about this item

How can I verify the cable is delivering 600 MHz performance after connecting it?

The cable is rated for 600 MHz and built with 26 AWG double-shielded pure copper pairs plus 50 micron gold-plated RJ45 contacts; use a certified cable tester or network analyser to confirm the link meets Cat.7 specifications.

What comes in the box and do I need any extra parts to use it?

The box contains the 2 ft Cat.7 patch cable with shielded RJ45 plugs on both ends; no additional components are required for a standard Gigabit Ethernet connection.

Which version of this cable should I choose for a short Gigabit Ethernet run?

The 2 ft black Cat.7 SSTP cable with 26 AWG conductors, 600 MHz rating and T568B wiring is the appropriate choice for a short high-speed patch.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.