Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086501BTC
In stock
Nippon Labs
Nippon Labs 60CAT7-20GY network ethernet cable Cat 7 20 ft 26 AWG gray
Category 7 shielded patch cable with RJ45 connectors rated for 600 MHz over 20 ft of 26 AWG pure copper
- TypeNetwork Ethernet Cables
- Cat7
- Connector ARJ45
- Connector BRJ45
- Length20 ft.
- ColorGray
- Supports 600 MHz bandwidth for high-speed Gigabit Ethernet
- Double SSTP shielding reduces crosstalk and system noise
- 50-micron gold-plated RJ45 contacts resist corrosion
- 20 ft length with molded strain-relief boots for durability
- UL/ETL verified and RoHS compliant for safety
Nippon Labs Cat 7 shielded Ethernet cable
This 20 ft Cat 7 patch cable uses 26 AWG stranded pure copper conductors with double shielding and an overall braided screen. RJ45 plugs carry 50 micron gold-plated contacts and molded strain-relief boots. The cable is rated for 600 MHz bandwidth and complies with TIA/EIA standards verified by UL and ETL.
Who this suits and who should look elsewhere
Ideal for installers who need a fully shielded SSTP cable for Gigabit Ethernet runs up to the rated distance. Not suitable for buyers who require a longer single-run length than 20 ft, or for setups that demand solid-core conductors for structured wiring.
Deciding specification: 600 MHz Cat 7 bandwidth
The 600 MHz rating confirms the cable meets Cat 7 class F performance for 100 meter channels. This single figure tells you whether the link budget satisfies your Gigabit or 10 Gigabit Ethernet design.
Highlights
- Supports 600 MHz bandwidth for high-speed Gigabit Ethernet
- Double SSTP shielding reduces crosstalk and system noise
- 50-micron gold-plated RJ45 contacts resist corrosion
- 20 ft length with molded strain-relief boots for durability
- UL/ETL verified and RoHS compliant for safety
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT7-20GY |
| Type | Network Ethernet Cables |
| Cat | 7 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 20 ft. |
| Color | Gray |
| Shielded | Yes |
| Wire Gauge | 26 AWG |
| Features | 26AWG double shielded 4pair stranded pure copper wire RJ45 shielded plug with 50 micron gold plated contacts 600MHz rated CM Type PVC jacket Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant T-568B standard wiring Cat.7 patch cable specifications require transmission frequencies of up to 600 MHz over 100 meters (328Ft) of fully shielded copper cabling Cat.7 cable consists of four individually shielded pairs inside an overall braided shield, also known as Shielded Twisted Pair Cable (SSTP), or S/FTP (Shielded Foil Twisted Pair) Cat.7 features even more strin |
| Shipping weight | 0.38 kg |
| Package size | 229 × 178 × 51 mm |
Questions about this item
How can I confirm the cable is performing at its rated 600 MHz after installation?
Use a cable certifier or network tester that measures frequency response up to 600 MHz and verifies TIA/EIA compliance; the UL and ETL markings on the jacket indicate the cable meets those standards.
What comes in the box and do I need any extra parts for a typical Gigabit LAN connection?
The box contains the 20 ft Cat7 shielded patch cable with RJ45 connectors on both ends; no additional components are required for standard Gigabit Ethernet links.
Which length should I choose if my runs are under 100 meters?
The 20 ft length suits short patch runs; Cat7 specifications guarantee 600 MHz performance up to 100 meters (328 ft), so any shorter run including this one meets the full rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.0008413BTC
In stock
