We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short gray Cat7 ethernet cable with shielded RJ45 connectors and molded boots

Nippon Labs

Nippon Labs 60CAT7-1GY Cat7 network ethernet cable 1 ft Gray 26AWG 600MHz shielded

SKU CH-K9H9-QJN3K MPN 60CAT7-1GY

A 1 ft shielded Cat7 patch cable with 600 MHz bandwidth and gold-plated RJ45 connectors for Gigabit Ethernet links

  • TypeNetwork Ethernet Cables
  • Cat7
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorGray
  • 600 MHz bandwidth supports high-speed Gigabit Ethernet
  • Double SSTP shielding reduces crosstalk and system noise
  • 50-micron gold-plated contacts ensure durable, secure connections
  • 26 AWG pure copper conductors enhance signal performance
  • UL and ETL verified TIA/EIA compliant with RoHS approval

1 ft Cat7 shielded patch cable

This one-foot Cat7 cable uses double-shielded 26 AWG stranded pure copper conductors and shielded RJ45 plugs with 50 micron gold-plated contacts. The SSTP construction wraps each of the four pairs in foil and adds an overall braid for alien-crosstalk suppression. It is rated for 600 MHz bandwidth and wired to the T568B standard. The CM-rated PVC jacket meets UL and ETL listings and is RoHS compliant.

Shielded connectors and boot design

The moulded strain-relief boots protect the latch and the solder joints from repeated insertion cycles. Gold-plated contacts resist oxidation in humid rack environments. The shielded plug body maintains the cable's screening all the way to the jack, preventing ground-loop noise in PoE deployments. Double shielding on the cable itself reduces near-end crosstalk below Cat6 limits.

600 MHz Cat7 rating for Gigabit Ethernet

The 600 MHz rating is the specification that qualifies this cable for certified Gigabit Ethernet links up to 100 metres. Installers needing 10 GBASE-T over the full 100 metre channel should verify that their infrastructure supports Cat7/Class F performance, because this cable alone does not guarantee that margin. Buyers who need longer runs without couplers should select a different length.

Highlights

  • 600 MHz bandwidth supports high-speed Gigabit Ethernet
  • Double SSTP shielding reduces crosstalk and system noise
  • 50-micron gold-plated contacts ensure durable, secure connections
  • 26 AWG pure copper conductors enhance signal performance
  • UL and ETL verified TIA/EIA compliant with RoHS approval

Specifications

BrandNippon Labs
Model60CAT7-1GY
TypeNetwork Ethernet Cables
Cat7
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorGray
ShieldedYes
Wire Gauge26 AWG
Features26AWG double shielded 4pair stranded pure copper wire
RJ45 shielded plug with 50 micron gold plated contacts
600MHz rated
CM Type PVC jacket
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
T-568B standard wiring
Cat.7 patch cable specifications require transmission frequencies of up to 600 MHz over 100 meters (328Ft) of fully shielded copper cabling
Cat.7 cable consists of four individually shielded pairs inside an overall braided shield, also known as Shielded Twisted Pair Cable (SSTP), or S/FTP (Shielded Foil Twisted Pair)
Cat.7 features even more strin
Shipping weight0.06 kg
Package size152 × 127 × 25 mm

Questions about this item

Will the 50 micron gold-plated contacts on the RJ45 plugs wear out and need replacement?

The 50 micron gold plating on the shielded RJ45 contacts resists corrosion and maintains conductivity over repeated insertions, so the connectors themselves do not require scheduled replacement under normal use.

At the 600 MHz rating, what limits sustained throughput first on a 1 ft Cat7 run?

On a 1 ft length the cable meets the 600 MHz specification; the practical limit becomes the connected network equipment rather than the 26 AWG stranded copper conductors or the double SSTP shielding.

Does the CM-rated PVC jacket or the double shielding generate noticeable heat when the link runs at full speed all day?

Passive copper cables do not produce measurable heat; the CM PVC jacket and the foil-plus-braid shielding remain at ambient temperature during continuous Gigabit Ethernet operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.