We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs 60CAT7-10BL Cat7 network ethernet cable 10 ft Blue 26 AWG 600 MHz

SKU CH-4Z2W-EF5AX MPN 60CAT7-10BL

A 10 ft Cat7 shielded patch cable with 600 MHz bandwidth, 26 AWG pure copper conductors and gold-plated RJ45 connectors for Gigabit Ethernet

  • Cat7
  • Length10 ft.
  • ColorBlue
  • ShieldedYes
  • Wire Gauge26 AWG
  • Features26AWG double shielded 4pair stranded pure copper wire RJ45 s
  • Supports 600 MHz bandwidth for high-speed Gigabit Ethernet
  • Double-shielded SSTP construction reduces crosstalk and system noise
  • 50-micron gold-plated contacts ensure durable, corrosion-resistant connections
  • Molded strain-relief boots protect connectors from damage
  • 10 ft length with CM-rated PVC jacket for flexible indoor routing

10 ft Cat7 shielded patch cable

This 10 ft Cat7 cable uses 26 AWG stranded pure copper conductors with double shielding and an overall braided screen. It is rated for 600 MHz transmission and terminated with RJ45 plugs that carry 50 micron gold-plated contacts. The CM-type PVC jacket meets TIA/EIA requirements verified by UL and ETL, and the wiring follows the T568B standard. It suits home and office LAN links where certified Category 7 performance is specified.

Upgrade from unshielded Cat5e or Cat6 runs

The individually foil-shielded pairs and overall braid suppress alien crosstalk and system noise more effectively than unshielded Category 5e or 6 cables. The jump is worth it when the installation passes near power cables, fluorescent ballasts or dense patch panels that induce interference. For short desktop patches in a low-noise environment the extra shielding may not yield measurable throughput gains.

Straightforward RJ45 installation

The moulded strain-relief boots protect the latch tab and keep the connector seated during routine moves. The stranded construction stays flexible for tight bends behind desks or in cable trays. The main issues are over-bending beyond the cable’s natural radius, which can fracture the foil screens, and forgetting to ground the shield at both ends, which turns the screen into an antenna instead of a barrier.

Highlights

  • Supports 600 MHz bandwidth for high-speed Gigabit Ethernet
  • Double-shielded SSTP construction reduces crosstalk and system noise
  • 50-micron gold-plated contacts ensure durable, corrosion-resistant connections
  • Molded strain-relief boots protect connectors from damage
  • 10 ft length with CM-rated PVC jacket for flexible indoor routing

Specifications

BrandNippon Labs
Model60CAT7-10BL
Cat7
Length10 ft.
ColorBlue
ShieldedYes
Wire Gauge26 AWG
Features26AWG double shielded 4pair stranded pure copper wire
RJ45 shielded plug with 50 micron gold plated contacts
600MHz rated
CM Type PVC jacket
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
T-568B standard wiring
Cat.7 patch cable specifications require transmission frequencies of up to 600 MHz over 100 meters (328Ft) of fully shielded copper cabling
Cat.7 cable consists of four individually shielded pairs inside an overall braided shield, also known as Shielded Twisted Pair Cable (SSTP), or S/FTP (Shielded Foil Twisted Pair)
Cat.7 features even more strin
Shipping weight0.21 kg
Package size229 × 178 × 51 mm

Questions about this item

Will the 10 ft length and 26 AWG thickness reach my router without excess slack?

The cable measures 10 ft end to end with a 26 AWG stranded copper core, so measure the path from device to router and allow a little extra for routing around corners.

Do I need to ground the shielded RJ45 plugs when I snap them into my switch?

The RJ45 plugs are shielded with 50 micron gold plated contacts; the shield connects automatically when the plug seats fully, so push until you hear the click and do not leave the latch partially engaged.

How often should I replace the CM type PVC jacket if it runs along a baseboard?

The CM rated PVC jacket is rated for in-wall use and normal indoor wear; inspect it yearly for cracks or kinks and replace only if the jacket is damaged or the connectors become loose.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.