We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Purple Cat6A UTP patch cable, 6 ft, booted RJ45 connectors with gold contacts

Nippon Labs

Nippon Labs 60CAT6A-6PU network ethernet cable Cat6A UTP 6 ft Purple 24 AWG 50 micron gold RJ45

SKU CH-29M5-JE5W4 MPN 60CAT6A-6PU

A 6 ft Cat6A UTP patch cable with 24 AWG stranded copper and 50 micron gold RJ45 plugs, rated for 500 MHz and 10 Gigabit Ethernet

  • TypeNetwork Ethernet Cables
  • CatCat6A
  • Connector ARJ45 plug with 50 micron gold plating contacts
  • Connector BRJ45 plug with 50 micron gold plating contacts
  • Length6 ft
  • ColorPurple
  • 10 Gigabit Ethernet support for high-speed networking
  • 500 MHz minimum frequency enables greater bandwidth
  • 50 micron gold-plated contacts resist corrosion
  • 24 AWG stranded pure copper conductors ensure signal integrity
  • CM-rated PVC jacket meets fire-safety standards

Cat6A UTP cable for 10 Gigabit Ethernet

This 6 ft Cat6A unshielded twisted-pair patch cable is built for 10 Gigabit Ethernet links up to 100 meters. It uses 4-pair 24 AWG stranded pure copper conductors and RJ45 plugs with 50 micron gold-plated contacts. The purple CM-rated PVC jacket suits indoor rack, wall-plate or desktop connections. It meets TIA/EIA requirements verified by UL and ETL and complies with RoHS.

Booted RJ45 plugs simplify insertion and removal

The moulded boots protect the latch tab during repeated mating cycles, reducing the chance of a broken clip that would leave the connector loose in the port. Stranded conductors make the cable flexible for tight bends behind patch panels or in cable management trays. Because the cable is unshielded, it does not require a grounded shield path; simply snap each end into the RJ45 jack until the latch clicks. Avoid kinking the jacket or exceeding the minimum bend radius during routing.

Verify port speed and cable run length before

Ensure the switch, router or NIC port supports 10 Gigabit Ethernet to use the cable at its rated 500 MHz minimum frequency. The 6 ft length suits short patch-panel to switch links or device-to-wall-plate drops; longer runs up to 100 meters are within the Cat6A specification but require a longer cable. Confirm the existing infrastructure uses T568B wiring, as this cable follows that pin-out. If shielded cabling is required for EMI-heavy environments, this UTP construction will not meet that need.

Highlights

  • 10 Gigabit Ethernet support for high-speed networking
  • 500 MHz minimum frequency enables greater bandwidth
  • 50 micron gold-plated contacts resist corrosion
  • 24 AWG stranded pure copper conductors ensure signal integrity
  • CM-rated PVC jacket meets fire-safety standards

Specifications

BrandNippon Labs
Model60CAT6A-6PU
TypeNetwork Ethernet Cables
CatCat6A
Connector ARJ45 plug with 50 micron gold plating contacts
Connector BRJ45 plug with 50 micron gold plating contacts
Length6 ft
ColorPurple
ShieldedUnshielded Twisted Pair
Wire Gauge24 AWG
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: CM type PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight0.14 kg
Package size178 × 165 × 51 mm

Questions about this item

How can I verify the cable is delivering 10 Gigabit Ethernet performance after installation?

Connect it between two 10 Gigabit capable ports and confirm the link negotiates at 10000 Mbps; the cable is rated for 500 MHz minimum frequency and 550 MHz bandwidth to support that speed.

What comes with the 6 ft purple Cat6A cable and what must I purchase separately?

The package includes the booted patch cable with RJ45 plugs on both ends, 50 micron gold contacts, 24 AWG stranded pure copper conductors, CM PVC jacket and T568B wiring; no additional components are required for a standard connection.

Which version of this cable should I choose for a 10 Gigabit home network run under 100 meters?

This 6 ft Cat6A UTP model meets the 500 MHz specification for 10 Gigabit Ethernet up to 100 meters, so the listed length and category are the correct choice for that application.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.