We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Cat6A ethernet cable, 50 ft, RJ45 connectors, unshielded twisted pair

Nippon Labs

Nippon Labs 60CAT6A-50RD 50 ft Cat6A network ethernet cable

SKU CH-JF2W-29HDM MPN 60CAT6A-50RD

50 ft Cat6A UTP patch cable with RJ45 connectors, 24 AWG stranded copper, gold-plated contacts, CM PVC jacket, 500 MHz rated for 10 Gigabit Ethernet up to 100 m

  • TypeNetwork Ethernet Cables
  • CatCat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length50 ft
  • ColorRed
  • Supports 10 Gigabit Ethernet for high-speed data transfer
  • 500 MHz minimum frequency enables 550 MHz bandwidth performance
  • 24 AWG stranded pure copper conductors ensure reliable signal integrity
  • 50 micron gold-plated RJ45 contacts resist corrosion for lasting connectivity
  • CM-rated PVC jacket meets TIA/EIA standards with UL and ETL compliance

50 ft Cat6A Patch Cable

This 50 ft Cat6A UTP patch cable uses 24 AWG stranded pure copper conductors with RJ45 connectors on both ends. Gold-plated contacts and a CM-rated PVC jacket meet TIA/EIA standards verified by UL and ETL. It is built for 10 Gigabit Ethernet runs up to 100 meters.

Upgrade from Cat5e or Cat6

The jump is worth it when you need 10 Gigabit throughput over copper at 500 MHz minimum frequency. Cat6A suppresses crosstalk better than Cat5e and handles PoE heat more effectively. Existing Cat5e links limited to 1 Gigabit will not reach 10 Gigabit speeds without this cable class.

Suits 10 Gigabit home or office runs

Installers terminating to T568B wall plates or switch ports gain headroom for 10,000Base-T. Buyers needing shielded pairs for high-EMI environments or outdoor burial should look at something else. The unshielded design and CM jacket are not rated for plenum spaces or direct burial.

Highlights

  • Supports 10 Gigabit Ethernet for high-speed data transfer
  • 500 MHz minimum frequency enables 550 MHz bandwidth performance
  • 24 AWG stranded pure copper conductors ensure reliable signal integrity
  • 50 micron gold-plated RJ45 contacts resist corrosion for lasting connectivity
  • CM-rated PVC jacket meets TIA/EIA standards with UL and ETL compliance

Specifications

BrandNippon Labs
Model60CAT6A-50RD
TypeNetwork Ethernet Cables
CatCat6A
Connector ARJ45
Connector BRJ45
Length50 ft
ColorRed
ShieldedUnshielded Twisted Pair
Sports Team10 packs
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: CM type PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight1.00 kg
Package size279 × 203 × 64 mm

Questions about this item

How much space do the RJ45 plugs need behind a patch panel or switch port?

Each RJ45 plug has 50 micron gold-plated contacts and a boot; allow enough depth behind the port for the connector and its strain relief.

What wiring scheme do the factory-terminated ends follow, and which pinout step is most often reversed?

Both ends are wired to the T568B standard; the common mistake is mixing T568A on one side, which breaks the straight-through link.

When should this Cat6A UTP cable be replaced if it carries PoE?

Inspect the CM-rated PVC jacket and 24 AWG stranded copper conductors for heat damage or cracked insulation after heavy PoE use; replace if the sheath is brittle or conductors show discoloration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.