Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
Four-foot Cat6A UTP patch cable with RJ45 connectors supports 10 Gigabit Ethernet at 500 MHz and meets TIA/EIA standards
This 4-foot Cat6A UTP patch cable uses 24 AWG stranded pure copper conductors and RJ45 connectors wired to the T568B standard. Gold-plated contacts, molded strain-relief boots and snagless moulds protect the connection. The yellow CM-rated PVC jacket meets UL and ETL verification of TIA/EIA compliance and RoHS requirements.
The cable supports 10Base-T, 100Base-T, 1000Base-T and 10,000Base-T Ethernet at a minimum 500 MHz frequency, making it appropriate for 10 Gigabit copper runs within the 100 metre channel limit. It is not intended for installations that require shielded cabling or longer permanent-link distances.
The single specification that determines fit is the unshielded 24 AWG stranded copper design rated for 500 MHz; if the project calls for shielded cable, a different category or a longer permanent link, this part will not meet the requirement.
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT6A-4YW |
| Type | Network Ethernet Cables |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 4 ft. |
| Color | Yellow |
| Shielded | No |
| Wire Gauge | 24 AWG |
| Features | Cat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet). They are designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard Cat.6 cables. Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard High Performance RJ45 Ethernet Patch Cable provides univers |
| Shipping weight | 0.10 kg |
| Package size | 152 × 127 × 25 mm |
The 4 ft version keeps the run tidy on a desk or in a rack without excess slack, and the Cat 6A rating still supports the full 100 metre channel limit.
The cable is tested to 500 MHz minimum frequency and 550 MHz rated bandwidth, so it carries 10000Base-T traffic at the full 10 Gbit/s line rate over its 4 ft length.
Yes, both ends use the T568B pinout with 50 micron gold-plated contacts, matching every standard RJ45 jack on PCs, switches, routers and servers.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?