We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 4 ft Cat6A UTP Ethernet cable with booted RJ45 connectors

Nippon Labs

Nippon Labs 60CAT6A-4GY Cat6A UTP network ethernet cable 4 ft gray 24 AWG

SKU CH-XVYC-QC5PP MPN 60CAT6A-4GY

Four-foot Cat6A UTP patch cable with RJ45 connectors, 24 AWG stranded copper and 500 MHz rating for 10 Gigabit Ethernet up to 100 metres

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length4 ft.
  • ColorGray
  • Supports 10 Gigabit Ethernet up to 100 metres
  • 500 MHz minimum frequency enables high bandwidth
  • 24 AWG stranded pure copper conductors
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • UL and ETL verified TIA/EIA compliant

4 ft Cat6A UTP patch cable

This four-foot Category 6A UTP cable uses 24 AWG stranded pure copper conductors and RJ45 plugs with 50 micron gold-plated contacts. It is wired to the T568B standard and sheathed in CM-rated PVC. The cable supports 10Base-T, 100Base-T, 1000Base-T and 10,000Base-T Ethernet up to 100 metres. It operates at a minimum frequency of 500 MHz and carries UL, ETL and RoHS certifications.

Build integration and cable management

The short four-foot length suits patch-panel-to-switch links, rack-to-device hops or desk-side connections where excess slack would obstruct airflow. Unshielded twisted-pair construction keeps the cable flexible for tight routing through cable managers or raised-floor trays. Booted RJ45 connectors protect the latch during repeated insertion and removal. No external ground or shield termination is required, simplifying installation in standard keystone jacks or wall plates.

Upgrade path from Cat5e or Cat6

Replacing Cat5e or standard Cat6 links with this Cat6A cable raises the usable bandwidth ceiling to 10 Gigabit Ethernet and improves crosstalk suppression for cleaner 550 MHz signalling. The stranded 24 AWG conductors also handle Power over Ethernet heat dissipation more effectively than solid-core alternatives. The jump is worthwhile when 10GBASE-T ports are active or planned, or when existing runs show error rates that higher-specification cabling can resolve.

Highlights

  • Supports 10 Gigabit Ethernet up to 100 metres
  • 500 MHz minimum frequency enables high bandwidth
  • 24 AWG stranded pure copper conductors
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • UL and ETL verified TIA/EIA compliant

Specifications

BrandNippon Labs
Model60CAT6A-4GY
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length4 ft.
ColorGray
ShieldedUTP
Wire Gauge24 AWG
FeaturesCat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet).
They are designed specifically for 10 Gigabit Ethernet applications over copper.
They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz.
These cables deliver improved performance over standard Cat.6 cables.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant.
4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard.
High Performance RJ45 Ethernet Patch Cable provides unive
Shipping weight0.10 kg
Package size152 × 127 × 25 mm

Questions about this item

Will the 24 AWG conductors overheat when the cable carries full 10,000Base-T traffic all day?

The 24 AWG stranded pure copper conductors are rated for better heat dissipation in PoE applications and the CM PVC jacket handles continuous operation at the 500 MHz minimum frequency.

How loud is the cable when it runs 10 Gigabit Ethernet continuously?

A passive copper patch cable produces no audible noise; there are no fans, coils or moving parts to generate sound.

What devices must I already have to use this RJ45 Cat 6A cable?

You need two pieces of equipment with standard RJ45 ports — such as a switch, router, server or workstation — that support 10Base-T, 100Base-T, 1000Base-T or 10,000Base-T Ethernet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.