We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray 35-foot Cat6A UTP ethernet cable with booted RJ45 ends

Nippon Labs

Nippon Labs 60CAT6A-35GY network ethernet cable Cat6A UTP 35 ft 24 AWG Gray

SKU CH-E14A-N9T07 MPN 60CAT6A-35GY

35-foot Cat6A UTP patch cable with 24 AWG stranded copper conductors and gold-plated RJ45 connectors rated for 10 Gigabit Ethernet up to 100 meters

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length35 ft.
  • ColorGray
  • 10 Gigabit Ethernet support with 500 MHz minimum frequency
  • 35 ft UTP Cat6A cable for extended runs up to 100 meters
  • 24 AWG stranded pure copper conductors ensure reliable signal integrity
  • 50 micron gold-plated RJ45 contacts resist corrosion for lasting connections
  • CM-rated PVC jacket meets TIA/EIA standards verified by UL and ETL

35 ft Cat6A patch cable for 10 Gigabit Ethernet

This 35 ft Nippon Labs cable is a Cat6A UTP patch cord built for 10 Gigabit Ethernet up to 100 meters. It uses 24 AWG stranded pure copper conductors and RJ45 plugs with 50 micron gold contacts. The CM rated PVC jacket meets TIA/EIA standards verified by UL and ETL and is RoHS compliant. It suits home, office and data centre runs that need 10,000Base-T performance.

Thermals, noise and power draw

As a passive copper cable it generates no heat, produces no noise and draws no power of its own. The 24 AWG stranded conductors and UTP construction provide better heat dissipation for Power over Ethernet applications than smaller gauge cables. The CM type PVC jacket is rated for in-wall use without adding thermal load. Operation is completely silent and does not affect the power budget of connected switches or endpoints.

Upgrading from Cat5e or Cat6

Replaces Cat5e or standard Cat6 links when 10 Gigabit throughput or 500 MHz bandwidth is required. The jump is worth it for new 10GBASE-T gear, PoE+ deployments needing lower conductor heating, or any run approaching the 100 meter channel limit where crosstalk margin matters. It is not for builders who need shielded cable for high EMI environments or installations requiring outdoor or plenum rated jackets.

Highlights

  • 10 Gigabit Ethernet support with 500 MHz minimum frequency
  • 35 ft UTP Cat6A cable for extended runs up to 100 meters
  • 24 AWG stranded pure copper conductors ensure reliable signal integrity
  • 50 micron gold-plated RJ45 contacts resist corrosion for lasting connections
  • CM-rated PVC jacket meets TIA/EIA standards verified by UL and ETL

Specifications

BrandNippon Labs
Model60CAT6A-35GY
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length35 ft.
ColorGray
ShieldedUTP
Wire Gauge24 AWG
FeaturesCat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet).
They are designed specifically for 10 Gigabit Ethernet applications over copper.
They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz.
These cables deliver improved performance over standard Cat.6 cables.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant.
4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard.
High Performance RJ45 Ethernet Patch Cable provides unive
Shipping weight0.68 kg
Package size229 × 203 × 76 mm

Questions about this item

How do I install this 35 ft Cat6A cable and what step is often missed?

Plug the RJ45 connectors into the ports until they click; the step often missed is verifying the T568B wiring matches your network standard.

What maintenance or replacement will this 24 AWG UTP cable need later?

The 50 micron gold-plated contacts resist corrosion; replace only if the boot tears, the jacket kinks, or a certifier shows insertion-loss failure.

What limit appears first on this 500 MHz cable during sustained 10 Gigabit Ethernet use?

The 100 meter (328 ft) channel limit governs performance; at 35 ft you stay well within the 550 MHz rated bandwidth for 10,000Base-T.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.