We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange Cat6A UTP patch cable with booted RJ45 ends, 2 ft length

Nippon Labs

Nippon Labs 60CAT6A-2OR 2 ft Cat6A UTP network ethernet cable Orange

SKU CH-G4V6-G23E6 MPN 60CAT6A-2OR

A 2 ft Cat6A UTP patch cable with RJ45 connectors, 24 AWG stranded copper, gold-plated contacts, and 500 MHz bandwidth for 10 Gigabit Ethernet

  • TypeCat6A UTP Ethernet Network Booted Cable
  • CatCat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length2 ft
  • ColorOrange
  • Supports 10 Gigabit Ethernet up to 100 meters
  • Operates at 500 MHz minimum frequency for high data rates
  • 24 AWG stranded pure copper conductors enhance signal quality
  • Gold-plated RJ45 contacts with snagless boots resist corrosion
  • TIA/EIA compliant by UL and ETL, RoHS certified

Two-foot Cat6A patch cable

This orange Cat6A UTP cable measures two feet and terminates in RJ45 plugs on both ends. It is built for 10 Gigabit Ethernet links up to 100 metres and suits short runs between a switch, router, server or desktop in a rack or on a bench.

Booted gold-plated connectors

Each RJ45 plug carries 50 micron gold-plated contacts and a moulded strain-relief boot with a snagless profile. The CM-rated PVC jacket protects the four-pair 24 AWG stranded pure copper conductors while the boots guard the latch during frequent reconnection.

500 MHz minimum frequency

The cable is specified to operate at a minimum of 500 MHz and carries UL and ETL verification to the TIA/EIA standard. That frequency rating determines whether the link can sustain 10 000Base-T throughput over the full 100 metre channel without excess crosstalk or return loss.

Highlights

  • Supports 10 Gigabit Ethernet up to 100 meters
  • Operates at 500 MHz minimum frequency for high data rates
  • 24 AWG stranded pure copper conductors enhance signal quality
  • Gold-plated RJ45 contacts with snagless boots resist corrosion
  • TIA/EIA compliant by UL and ETL, RoHS certified

Specifications

BrandNippon Labs
Model60CAT6A-2OR
TypeCat6A UTP Ethernet Network Booted Cable
CatCat6A
Connector ARJ45
Connector BRJ45
Length2 ft
ColorOrange
ShieldedUnshielded Twisted Pair
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: CM type PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight0.07 kg
Package size152 × 127 × 51 mm

Questions about this item

Does the Cat6A rating and 500 MHz minimum frequency support 10 Gigabit Ethernet at this 2 ft length?

Yes, the cable is rated for 10,000Base-T up to 100 meters, so the 2 ft length easily handles 10 Gigabit Ethernet with the 500 MHz minimum frequency.

What physical space do the booted RJ45 connectors and 24 AWG stranded wire need to route cleanly?

The molded strain-relief boots and snagless molds add bulk at each end; allow extra clearance behind patch panels or switches and avoid tight bends on the 24 AWG stranded copper.

Is the T568B wiring standard pre-terminated on both RJ45 plugs, or must I re-crimp?

Both ends come factory-terminated to the T568B standard with 50 micron gold-plated contacts; no re-crimping is required for standard Ethernet gear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.