We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2 ft Cat6A UTP Ethernet patch cable with booted RJ45 connectors

Nippon Labs

Nippon Labs 60CAT6A-2BK Cat6A UTP network ethernet cable 2 ft Black 24AWG

SKU CH-V838-QZ92B MPN 60CAT6A-2BK

Two-foot Cat6A UTP patch cable with 24 AWG stranded copper, gold-plated RJ45 plugs and 500 MHz rating for 10 Gigabit Ethernet

  • Cat6A
  • Length2 ft.
  • ColorBlack
  • ShieldedUTP
  • Wire Gauge24 AWG
  • FeaturesCat.6A patch cable is used in network applications such as 1
  • 10 Gigabit Ethernet performance up to 100 meters
  • 500 MHz minimum frequency enables high-speed data transfer
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • TIA/EIA UL and ETL certified with RoHS compliance

Short patch cable for 10 GbE runs

This two-foot Cat6A UTP patch cord connects network gear in racks, cabinets or on desks where a short link is required. Stranded 24 AWG pure-copper conductors and gold-plated RJ45 contacts support 10,000Base-T Ethernet up to 100 meters. The cable is rated for 500 MHz minimum frequency and 550 MHz bandwidth. It suits installers and home users who need a reliable gigabit or 10 GbE jumper.

Booted RJ45 plugs and T568B wiring

Moulded boots protect the latch during repeated insertion and removal, reducing the chance of a broken tab that causes intermittent contact. The cable follows T568B pinout, so it matches most patch-panel and wall-plate terminations without crossover adapters. Because the jacket is CM-rated PVC, it cannot be run in plenum spaces; verify local fire codes before routing through air-handling areas. UTP construction means no ground-loop issues, but also no shield for high-EMI environments.

100-metre channel limit and UTP constraints

The 10 GbE specification allows a 100 metre channel including all patch cords, so this two-foot length consumes only a small fraction of the budget. UTP cables rely on pair twist for crosstalk suppression; tight bends, kinks or staple guns can degrade performance beyond the 500 MHz rating. PoE applications benefit from the 24 AWG conductors' lower resistance, yet the cable carries no temperature derating data. For outdoor, direct-burial or plenum routes, a different jacket type is required.

Highlights

  • 10 Gigabit Ethernet performance up to 100 meters
  • 500 MHz minimum frequency enables high-speed data transfer
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • TIA/EIA UL and ETL certified with RoHS compliance

Specifications

BrandNippon Labs
Model60CAT6A-2BK
Cat6A
Length2 ft.
ColorBlack
ShieldedUTP
Wire Gauge24 AWG
FeaturesCat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet).
They are designed specifically for 10 Gigabit Ethernet applications over copper.
They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz.
These cables deliver improved performance over standard Cat.6 cables.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant.
4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard.
High Performance RJ45 Ethernet Patch Cable provides unive
Shipping weight0.07 kg
Package size152 × 127 × 25 mm

Questions about this item

How can I confirm the 2 ft Cat6A cable is delivering 10 Gigabit speeds after I plug it in?

Check that both connected devices negotiate a 10000Base-T link and run a throughput test at 500 MHz or above; the UL/ETL-verified TIA/EIA compliance and 550 MHz rating ensure the cable can handle the full 10 Gbps bandwidth.

What comes with the 60CAT6A-2BK and do I need any extra parts to use it?

The box contains one 2 ft black UTP patch cable with RJ45 male plugs on both ends, 24 AWG stranded copper conductors, 50 micron gold-plated contacts and CM-rated PVC jacket; no additional components are required for a standard LAN connection.

Should I choose this 2 ft version or a longer length for my 10 Gigabit run?

Pick the 2 ft cable when the switch and device are close together; Cat6A supports 10 Gigabit Ethernet up to 100 meters (328 feet), so longer lengths are only needed for greater distances.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.