We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Cat6A UTP patch cable, 1 ft, RJ45 connectors, booted ends

Nippon Labs

Nippon Labs 60CAT6A-1RD 1 ft Cat6A network ethernet cable Red

SKU CH-KVAC-9E214 MPN 60CAT6A-1RD

One-foot Cat6A UTP patch cable with RJ45 connectors rated for 10 Gigabit Ethernet at 500 MHz

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft
  • ColorRed
  • Supports 10 Gigabit Ethernet up to 100 metres
  • 550 MHz bandwidth rating enables high-speed data transfer
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • CM-rated PVC jacket meets safety standards for in-wall use

1 ft Cat6A patch cable for short runs

This 1 ft Cat6A UTP cable uses 4-pair 24 AWG stranded pure copper conductors with RJ45 plugs and 50 micron gold-plated contacts. The CM-rated PVC jacket meets TIA/EIA standards verified by UL and ETL and is RoHS compliant. It is wired to the T568B standard and suited for patch-panel, switch or device connections in a rack or on a desk.

500 MHz bandwidth and 10 Gbps headroom

The cable operates at a minimum 500 MHz and is rated to 550 MHz, supporting 10Base-T, 100Base-T, 1000Base-T and 10,000Base-T Ethernet. At 1 ft it provides ample headroom for 10 Gigabit links within a cabinet, while the Cat6A specification allows runs up to 100 meters (328 ft) for full-distance 10 Gbps connections.

Upgrade from Cat5e or Cat6 links

Replacing Cat5e or standard Cat6 patch cords with this Cat6A cable adds crosstalk suppression, better heat dissipation for PoE and the 500 MHz-plus bandwidth needed for reliable 10 Gbps throughput. The jump is worth it when 10 Gigabit switches or servers are deployed and existing patch cords become the bottleneck.

Highlights

  • Supports 10 Gigabit Ethernet up to 100 metres
  • 550 MHz bandwidth rating enables high-speed data transfer
  • 50 micron gold-plated RJ45 contacts resist corrosion
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • CM-rated PVC jacket meets safety standards for in-wall use

Specifications

BrandNippon Labs
Model60CAT6A-1RD
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length1 ft
ColorRed
ShieldedUnshielded Twisted Pair
Sports Team10 packs
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: CM type PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight0.06 kg
Package size152 × 127 × 51 mm

Questions about this item

Will the 1 ft Cat6A cable work with my older Cat5e router and gigabit switch?

Yes. The RJ45 connectors are backwards compatible with 10Base-T, 100Base-T and 1000Base-T equipment, so the cable will link at the highest speed both devices support.

How can I verify the 500 MHz / 10 Gigabit performance after I plug it in?

Check the link speed in your OS or switch dashboard — it should negotiate 10 Gbps — and run a throughput test such as iperf3 to confirm sustained 10 Gbit/s transfer.

Does the single 1 ft red cable come with any boots, ties or extra connectors, or do I need to buy them separately?

The cable has moulded strain-relief boots on both RJ45 ends; no additional ties, couplers or connectors are included in the package.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.