We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 15 ft Cat 6A UTP Ethernet cable with booted RJ45 connectors

Nippon Labs

Nippon Labs 60CAT6A-15WT network ethernet cable 15 ft Cat 6A white

SKU CH-4V7J-GGGZ6 MPN 60CAT6A-15WT

A 15 ft Cat 6A UTP patch cable with RJ45 connectors rated for 10 Gigabit Ethernet at 500 MHz

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length15 ft.
  • ColorWhite
  • Supports 10 Gigabit Ethernet up to 100 metres
  • Operates at a minimum frequency of 500 MHz
  • Gold-plated contacts and snagless boots resist corrosion
  • 24 AWG stranded pure copper conductors enhance signal quality
  • Compliant with TIA/EIA standards verified by UL and ETL

Cat 6A cable for 10 Gigabit Ethernet

This Cat 6A patch cable supports 10 Gigabit Ethernet up to 100 meters with a 500 MHz minimum frequency. It uses 24 AWG stranded pure copper conductors in an unshielded twisted pair design. Gold-plated RJ45 contacts and molded strain-relief boots provide durable connections. The 15-foot white cable follows T568B wiring and meets TIA/EIA standards with UL and ETL verification.

Suited for short 10Gbps links not requiring

The unshielded construction suits typical home and office runs where alien crosstalk is low. Buyers needing shielded cable for noisy environments or outdoor burial should look elsewhere. The fixed 15-foot length does not fit installations requiring longer or custom-cut runs. PoE devices benefit from the 550 MHz rating and improved heat dissipation.

500 MHz minimum frequency enables 10GBASE-T

Operating at 500 MHz minimum, this cable meets the Cat 6A requirement for 10,000Base-T Ethernet over copper. The 24 AWG pure copper conductors and 550 MHz tested rating support the bandwidth needed for 10 Gigabit speeds. Without this frequency margin, the cable could not guarantee 10Gbps performance over the full 100-meter channel.

Highlights

  • Supports 10 Gigabit Ethernet up to 100 metres
  • Operates at a minimum frequency of 500 MHz
  • Gold-plated contacts and snagless boots resist corrosion
  • 24 AWG stranded pure copper conductors enhance signal quality
  • Compliant with TIA/EIA standards verified by UL and ETL

Specifications

BrandNippon Labs
Model60CAT6A-15WT
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length15 ft.
ColorWhite
ShieldedNo
Wire Gauge24 AWG
FeaturesCat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet).
They are designed specifically for 10 Gigabit Ethernet applications over copper.
They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz.
These cables deliver improved performance over standard Cat.6 cables.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard
High Performance RJ45 Ethernet Patch Cable provides univers
Shipping weight0.30 kg
Package size229 × 178 × 51 mm

Questions about this item

How do I install the 15 ft Cat 6A cable with RJ45 connectors, and what step do people often get wrong?

Plug each RJ45 connector into the matching port until the tab clicks; the step people miss is aligning the keyed tab before pushing, otherwise the latch will not engage and the link drops.

What maintenance or replacement will the 24 AWG stranded copper cable with 50 micron gold-plated contacts need later?

No routine maintenance is required; inspect the molded boots and snagless molds for cracks after moves, and replace the cable only if the jacket is cut or a connector tab breaks.

What limit shows up first under sustained 10 Gigabit Ethernet use on this 15 ft UTP patch cable?

The 500 MHz minimum frequency rating and 100 metre channel limit govern sustained 10,000Base-T performance; at 15 ft the cable is well within spec, so the first limit encountered will be the switch or NIC port speed, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.