We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Cat6A UTP Ethernet cable 15 ft with RJ45 connectors

Nippon Labs

Nippon Labs 60CAT6A-15GN network ethernet cable 15 ft Cat6A Green

SKU CH-DBKD-K4X6H MPN 60CAT6A-15GN

15 ft Cat6A UTP patch cable with gold-plated RJ45 plugs for 10 Gigabit Ethernet up to 100 metres

  • TypeNetwork Ethernet Cables
  • CatCat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length15 ft
  • ColorGreen
  • Supports 10 Gigabit Ethernet for high-speed networking
  • 500 MHz minimum frequency enables greater bandwidth
  • 50 micron gold-plated contacts resist corrosion
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • CM-rated PVC jacket meets fire-safety standards

Network cable for 10 Gigabit links

This 15 ft Cat6A patch cable connects routers, switches, PCs or NAS devices using standard RJ45 plugs. It is built for 10 Gigabit Ethernet over copper and supports 10Base-T, 100Base-T, 1000Base-T and 10000Base-T up to 100 metres. The green jacket uses CM-rated PVC and the wiring follows the T568B standard.

Signal quality at 500 MHz

Unshielded twisted-pair construction with 24 AWG stranded pure copper conductors keeps crosstalk low at the rated 500 MHz minimum frequency. Gold-plated contacts on both RJ45 plugs resist oxidation for stable conductivity. The CM PVC jacket handles normal indoor heat without degrading signal integrity.

Maximum run length is 100 metres

The specification that decides fit is the 100 metre (328 ft) channel limit for 10 Gigabit Ethernet. This 15 ft assembly leaves ample margin for patch-panel and equipment-cord segments. Installations needing longer single runs or shielded cable for noisy environments should choose a different product.

Highlights

  • Supports 10 Gigabit Ethernet for high-speed networking
  • 500 MHz minimum frequency enables greater bandwidth
  • 50 micron gold-plated contacts resist corrosion
  • 24 AWG stranded pure copper conductors ensure reliable signal
  • CM-rated PVC jacket meets fire-safety standards

Specifications

BrandNippon Labs
Model60CAT6A-15GN
TypeNetwork Ethernet Cables
CatCat6A
Connector ARJ45
Connector BRJ45
Length15 ft
ColorGreen
ShieldedUnshielded Twisted Pair
Sports Team10 packs
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: CM type PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight0.30 kg
Package size229 × 178 × 51 mm

Questions about this item

How do I install this 15 ft Cat6A cable and what step do people get wrong?

Plug each RJ45 connector firmly until it clicks into the device port; the common mistake is not pushing the tab fully home, which leaves the 50 micron gold contacts partially seated and can cause intermittent 10 Gigabit links.

What maintenance or replacement will this cable need later?

No routine maintenance is required; replace the cable only if the CM type PVC jacket is cut, the boots tear, or the stranded 24 AWG conductors develop a fault after repeated bending.

What limit appears first under sustained 10 Gigabit use?

The 15 ft length is well within the 100 meter channel limit, so the first bound you reach is the 500 MHz minimum frequency rating that defines Cat6A performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.