Nippon Labs
Nippon Labs 60CAT6A-15-28AM Cat6A armored anti-rodent network ethernet cable 15 ft
Armoured Cat6A patch cable with stainless-steel jacket resists rodents, moisture and UV for outdoor or industrial runs
- TypeNetwork Ethernet Cables
- CatCat6A
- Connector ARJ45 plug with 50-micron gold plating contacts
- Connector BRJ45 plug with 50-micron gold plating contacts
- Length15 ft.
- ShieldedUnshielded Twisted Pair
- Stainless-steel armor stops rodents from damaging the cable
- IP65 rating keeps water out in wet conditions
- UV-resistant jacket prevents sunlight degradation outdoors
- 50-micron gold contacts resist corrosion for reliable signals
- 28 AWG stranded copper stays flexible in tight spaces
Armored Cat6A cable for harsh environments
This 15 ft Cat6A patch cable uses a stainless-steel SUS304 armored jacket over PVC to resist rodents, moisture, UV and corrosion. It is rated IP65 for water resistance and built for outdoor, industrial and PoE installations where standard cables fail. The 28 AWG stranded bare copper conductors remain flexible despite the armor.
Easy routing with armored flexibility
The SUS304 armor is designed to bend through tight spaces without kinking, so installation follows normal RJ45 plug-and-play steps. Because the jacket is heavier than a standard UTP cable, allow extra slack at bends and avoid exceeding the minimum bend radius of the armor. Connectors are pre-terminated to T568B wiring.
Verify length, rating and connector needs
Confirm the 15 ft length suits the run between your switch, router or PoE device and the endpoint. Ensure the environment demands IP65 water resistance and UV protection, otherwise a lighter cable may be simpler. Check that both ports accept standard RJ45 plugs with 50-micron gold contacts and that T568B pinout matches your wiring scheme.
Highlights
- Stainless-steel armor stops rodents from damaging the cable
- IP65 rating keeps water out in wet conditions
- UV-resistant jacket prevents sunlight degradation outdoors
- 50-micron gold contacts resist corrosion for reliable signals
- 28 AWG stranded copper stays flexible in tight spaces
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT6A-15-28AM |
| Type | Network Ethernet Cables |
| Cat | Cat6A |
| Connector A | RJ45 plug with 50-micron gold plating contacts |
| Connector B | RJ45 plug with 50-micron gold plating contacts |
| Length | 15 ft. |
| Shielded | Unshielded Twisted Pair |
| Features | Conductor: 4-pair UTP (Unshielded Twisted Pair) 28 AWG stranded bare copper Connectors: RJ45 plug with 50-micron gold plating contacts Jacket: SUS304+PVC Jacket Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant Wiring: T568B standard Applications: · Factory Automation · Harsh Environment Applications · Industrial/ Commercial and Residential Installations · Poe Installations |
Questions about this item
How do I confirm the cable is passing traffic at Cat6A speeds after I plug it in?
Connect the RJ45 plugs into both devices and verify the link LED shows a 10 Gbps or Cat6A connection; the 50-micron gold-plated contacts and T568B wiring ensure proper signal integrity.
What comes with the cable and do I need any extra parts for a typical PoE run?
The 15 ft armored cable with SUS304+PVC jacket and two RJ45 plugs is supplied ready to use; no additional components are required for standard PoE installations.
Which version should I choose if I need a 15 ft outdoor-rated run with rodent protection?
This 60CAT6A-15-28AM model provides a 15 ft length, 28 AWG stranded conductors, IP65 water resistance, UV resistance and stainless-steel armor for rodent protection in a single part number.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



