Nippon Labs 60CAT6A-10RD 10 ft Cat6A network ethernet cable 10 pack red

Ten-foot Cat6A UTP cables in red

This ten-pack supplies ten-foot Cat6A unshielded twisted-pair cables with RJ45 plugs on both ends. Each cable uses 24 AWG stranded pure copper conductors and a CM-rated PVC jacket. Gold-plated contacts at 50 microns resist corrosion. The wiring follows the T568B standard. The pack suits installers who need multiple identical runs for patching or permanent links.

Suits structured wiring up to 100 metres

The cables meet the 500 MHz minimum frequency and are rated for 10 Gigabit Ethernet over distances up to 100 metres (328 feet). They handle 10Base-T, 100Base-T, 1000Base-T and 10,000Base-T traffic. Builders who require shielded cable for noisy environments or plenum-rated jackets for air-handling spaces should look elsewhere. The unshielded design also limits alien-crosstalk immunity in dense bundles.

Headroom for 10 Gigabit over copper

At 550 MHz tested bandwidth the cables give comfortable headroom for 10 Gigabit Ethernet and Power over Ethernet loads with better heat dissipation than lower categories. Performance tapers beyond the 100-metre channel limit defined by the TIA/EIA standard. Runs longer than 100 metres or installations needing certified shielded performance will exceed the design envelope.