We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray UTP Cat6A ethernet cable with booted RJ45 connectors, 100 ft length

Nippon Labs

Nippon Labs 60CAT6A-100GY network ethernet cable Cat6A UTP 100 ft Gray 24 AWG

SKU CH-5Z20-9BWB7 MPN 60CAT6A-100GY

Unshielded Cat6A patch cable with gold-plated RJ45 connectors, 100 ft length, 24 AWG stranded copper, rated for 10 Gigabit Ethernet up to 100 meters

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length100 ft.
  • ColorGray
  • 10 Gigabit Ethernet ready up to 100 metres
  • 500 MHz minimum frequency for high bandwidth
  • 50 micron gold-plated contacts resist corrosion
  • 24 AWG stranded pure copper conductors
  • CM-rated PVC jacket meets fire safety standards

100-foot Cat6A UTP cable for 10 Gigabit links

This 100-foot Cat6A UTP patch cable uses 24 AWG stranded pure copper conductors and RJ45 plugs with 50 micron gold-plated contacts. It is wired to the T568B standard and sheathed in CM-rated PVC. The cable supports 10Base-T, 100Base-T, 1000Base-T and 10,000Base-T Ethernet up to 100 meters (328 feet) and meets TIA/EIA requirements verified by UL and ETL with RoHS compliance.

Sustained 10 Gigabit throughput at 500 MHz minimum

The cable operates at a minimum frequency of 500 MHz and carries a 550 MHz rating to support higher bandwidth during continuous 10 Gigabit Ethernet traffic. Unshielded twisted-pair construction with 4-pair stranded copper provides crosstalk suppression for a clean signal over long runs. Improved heat dissipation compared with standard Cat6 helps maintain performance in Power over Ethernet applications.

Upgrade from Cat5e or Cat6 when 10 Gigabit is

Replacing Cat5e or Cat6 with this Cat6A cable is worthwhile when the network must carry 10 Gigabit Ethernet over copper at full 100-meter distance. The higher frequency rating and stricter crosstalk control remove the bottlenecks that limit older categories to shorter reaches or lower speeds. Buyers who need only 1 Gigabit links or shorter patch lengths will not see a practical benefit.

Highlights

  • 10 Gigabit Ethernet ready up to 100 metres
  • 500 MHz minimum frequency for high bandwidth
  • 50 micron gold-plated contacts resist corrosion
  • 24 AWG stranded pure copper conductors
  • CM-rated PVC jacket meets fire safety standards

Specifications

BrandNippon Labs
Model60CAT6A-100GY
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length100 ft.
ColorGray
ShieldedUTP
Wire Gauge24 AWG
FeaturesCat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet).
They are designed specifically for 10 Gigabit Ethernet applications over copper.
They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz.
These cables deliver improved performance over standard Cat.6 cables.
Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant.
4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard.
High Performance RJ45 Ethernet Patch Cable provides unive
Shipping weight1.63 kg
Package size279 × 203 × 127 mm

Questions about this item

Does the 24 AWG stranded copper conductor handle continuous PoE loads without overheating?

The cable uses 24 AWG stranded pure copper conductors with a CM-rated PVC jacket that provides better heat dissipation for PoE applications, keeping temperatures stable during all-day operation.

What RJ45 ports are required on my switch and devices for this cable to work?

Both ends use standard RJ45 male connectors wired to the T568B standard, so any switch, router, PC or NAS with a regular RJ45 port will accept the plug directly.

Will this 100 ft Cat 6A run reliably at 10 Gigabit speeds alongside my older Cat 5e patch cords?

Yes, the cable is rated for 10,000Base-T up to 100 meters and operates at a minimum 500 MHz frequency, so it maintains full 10 Gigabit performance even when mixed with legacy Cat 5e links in the same network.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.