Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
A 100 ft Cat6A UTP patch cable with RJ45 connectors supporting 10 Gigabit Ethernet up to 100 meters at 500 MHz
This 100-foot Cat6A UTP patch cable uses 24 AWG stranded pure copper conductors and RJ45 plugs with 50-micron gold contacts. It is built for 10 Gigabit Ethernet links up to 100 meters and operates at a minimum frequency of 500 MHz. The CM-rated PVC jacket meets TIA/EIA standards verified by UL and ETL and is RoHS compliant. Wiring follows the T568B standard.
Unshielded twisted pair construction keeps the cable flexible and easy to route, but it does not block external electromagnetic interference the way shielded categories do. In dense cable trays or near power lines, alien crosstalk can reduce the usable bandwidth below the 550 MHz rating. The 100-foot length stays well within the 328-foot channel limit for 10,000Base-T, yet installers must still respect bend-radius and bundling guidelines to maintain performance.
The defining figure for this cable is its guaranteed minimum operating frequency of 500 MHz, which enables 10 Gigabit Ethernet over the full 100-meter channel. If the installation only requires 1000Base-T or slower speeds, a lower-category cable would also work. Buyers who need shielded construction for high-interference sites or outdoor burial-rated jackets should look elsewhere.
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT6A-100BL |
| Type | Network Ethernet Cables |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 100 ft. |
| Color | Blue |
| Shielded | UTP |
| Features | Cat.6A patch cable is used in network applications such as 10Base-T, 100Base-T, 1000Base-T, 10,000Base-T Ethernet up to 100 meters (328 feet). They are designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard Cat.6 cables. Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant. 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded pure copper wire & T568B standard. High Performance RJ45 Ethernet Patch Cable provides unive |
| Shipping weight | 1.63 kg |
| Package size | 279 × 203 × 127 mm |
This model is supplied at 100 ft in blue; if you need a shorter run choose another length in the same Cat6A UTP range.
The cable supports 10,000Base-T up to 100 meters (328 feet), so a 100 ft run will carry full 10 Gb/s throughput.
Operating at a minimum 500 MHz (550 MHz rated) provides the bandwidth headroom required for 10 Gigabit Ethernet over copper.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?