Nippon Labs
Nippon Labs 60CAT6A-100-24AM CAT6A Armored Anti-Rodent Ethernet Cable 100 ft 24AWG Silver
Armoured Cat6a patch cable with stainless-steel jacket resists rodents, water (IP65) and UV for outdoor or industrial PoE runs
- TypeGigabit LAN Network Cable
- Cat6A
- Length100 ft.
- ColorSilver
- ShieldedUTP (Unshielded Twisted Pair)
- FeaturesApplications: Factory Automation; Harsh Environment Applicat
- Rodent-proof armor protects wiring in harsh environments
- Stainless-steel SUS304 jacket stays flexible for tight routing
- IP65-rated water resistance handles outdoor exposure
- UV-resistant materials prevent sunlight degradation over time
- 50-micron gold-plated RJ45 contacts ensure reliable PoE connections
Armored CAT6A cable for harsh environments
This 100 ft CAT6A Ethernet cable uses a stainless-steel armored jacket to protect the 24 AWG stranded copper conductors from rodents, moisture and corrosion. The UTP design meets TIA/EIA standards with UL and ETL verification and is RoHS compliant. RJ45 plugs with 50-micron gold contacts follow the T568B wiring scheme. The IP65 and UV rated SUS304+PVC jacket suits outdoor and industrial runs.
Suited for industrial and outdoor PoE runs
Installers who need a single 100 ft drop that survives factory floors, direct burial or exposed exterior routes will benefit from the armor and IP65 rating. Buyers who want more storage, builders who need a second card or anyone requiring shielded twisted pair for high-EMI environments should look at a different cable type. The unshielded construction limits noise immunity in heavy electrical fields.
Flexible armor eases tight-space routing
The SUS304 jacket bends around cable trays and conduit without kinking, so pulls through limited-access areas stay straightforward. What usually goes wrong is exceeding the minimum bend radius during installation, which can deform the armor and stress the conductors. Ensure connectors are fully seated to maintain the IP65 seal at each end.
Highlights
- Rodent-proof armor protects wiring in harsh environments
- Stainless-steel SUS304 jacket stays flexible for tight routing
- IP65-rated water resistance handles outdoor exposure
- UV-resistant materials prevent sunlight degradation over time
- 50-micron gold-plated RJ45 contacts ensure reliable PoE connections
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT6A-100-24AM |
| Type | Gigabit LAN Network Cable |
| Cat | 6A |
| Length | 100 ft. |
| Color | Silver |
| Shielded | UTP (Unshielded Twisted Pair) |
| Features | Applications: Factory Automation; Harsh Environment Applications; Industrial/ Commercial and Residential Installations; PoE Installations Conductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded bare copper Connectors: RJ45 plug with 50-micron gold plating contacts Jacket: SUS304+PVC Jacket Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant Wiring: T568B standard |
Questions about this item
What type of RJ45 port must my switch or router have for this cable to plug in?
The cable terminates in standard RJ45 plugs with 50-micron gold-plated contacts, so any standard RJ45 jack on a switch, router or patch panel will accept it.
Will the stainless-steel armor interfere with PoE power delivery on my existing PoE switch?
No. The cable is specified for PoE installations and uses 4-pair 24 AWG stranded bare copper conductors that carry both data and power without interference from the SUS304 armor.
How can I verify the link is running at Cat 6A speeds after I install the cable?
Check the link status LEDs on both connected devices; they should indicate a 10 Gigabit or 10G connection, confirming the cable is performing to its Cat 6A rating.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



