Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086372BTC
In stock
Nippon Labs
Nippon Labs 60CAT6-40BL network ethernet cable Cat6 40 ft blue UTP 24 AWG
A 40 ft Cat6 UTP patch cable with 24 AWG stranded copper, gold-plated RJ45 connectors and snagless boots for reliable Gigabit Ethernet links
- TypeNetwork Ethernet Cables
- CatCat6
- Connector ARJ45
- Connector BRJ45
- Length40 ft.
- ColorBlue
- Reliable gigabit links with Cat6 UTP construction
- 40 ft reach suits room-to-room wiring
- 24 AWG stranded copper resists fatigue from bending
- Gold-plated RJ45 contacts reduce corrosion over time
- Snagless boot protects locking tabs during frequent moves
Nippon Labs Cat6 40 ft Ethernet Cable
This Nippon Labs Cat6 patch cable is a 40 ft unshielded twisted pair cord built with 24 AWG stranded bare copper conductors. It terminates in RJ45 plugs fitted with 50 micron gold-plated contacts and a snagless boot that guards the locking tab. The PVC jacket meets UL and ETL verification and complies with TIA/EIA-568-C.2 Category 6 standards. Wiring follows the T568B pinout.
Suited for standard home and office links
The cable suits anyone wiring a computer to a router, patch panel, cable modem or switch where a 40 ft blue UTP run is required. It is not intended for installations that demand shielded cable, plenum-rated jackets or outdoor-rated construction. Buyers who need a different length, colour or a solid-core conductor for permanent in-wall runs should select an alternative product.
Check connector and length before ordering
Verify that both endpoints accept standard RJ45 connectors and that a 40 ft reach covers the distance without excess slack. Confirm the equipment uses T568B wiring, which this cable follows. Ensure the pathway can accommodate an unshielded PVC jacket and that no local code requires a higher fire rating. No special tools are needed beyond a basic cable tester if desired.
Highlights
- Reliable gigabit links with Cat6 UTP construction
- 40 ft reach suits room-to-room wiring
- 24 AWG stranded copper resists fatigue from bending
- Gold-plated RJ45 contacts reduce corrosion over time
- Snagless boot protects locking tabs during frequent moves
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 60CAT6-40BL |
| Type | Network Ethernet Cables |
| Cat | Cat6 |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 40 ft. |
| Color | Blue |
| Shielded | Unshielded Twisted Pair |
| Wire Gauge | 24 AWG |
| Features | Conductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded bare copper Connectors: RJ45 plug with 50 micron gold plating contacts Jacket: PVC Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant Wiring: T568B standard |
| Shipping weight | 0.91 kg |
| Package size | 229 × 203 × 76 mm |
Questions about this item
What devices need RJ45 ports to use this 40 ft Cat6 cable?
Any equipment with standard RJ45 jacks — routers, switches, patch panels, cable modems or computers — will accept the 50 micron gold-plated connectors on both ends.
Will this UTP Cat6 cable work with my older Cat5e patch panel and Gigabit switch?
Yes. The T568B-wired RJ45 plugs fit Cat5e and Cat6 ports alike, so the 24 AWG stranded copper pairs will link at the highest speed both ends support.
How can I verify the cable is performing to Cat6 specification after installation?
A qualified cable certifier should show the link passing TIA/EIA-568-C.2 Cat.6 test limits; the UL and ETL markings on the jacket confirm the cable meets those standards.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00084005BTC
In stock
