We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Nippon Labs

Nippon Labs 60CAT6-30BL network ethernet cable Cat6 30 ft Blue 24AWG UTP

SKU CH-6GA9-JEVQS MPN 60CAT6-30BL

A 30 ft Cat6 UTP patch cable with 24 AWG stranded copper conductors, gold-plated RJ45 connectors and snagless boots for home or office networks

  • TypeNetwork Ethernet Cables
  • CatCat6
  • Connector ARJ45
  • Connector BRJ45
  • Length30 ft.
  • ColorBlue
  • Reliable gigabit links for home and office networks
  • 30 ft reach connects devices across rooms without excess slack
  • Snagless booted RJ45 plugs protect locking tabs from damage
  • 50 micron gold-plated contacts resist corrosion for lasting signal quality
  • UL and ETL verified to TIA/EIA-568-C.2 Cat6 standard

Cat6 30 ft UTP patch cable

This 30-foot Cat6 patch cable uses four twisted pairs of 24 AWG stranded bare copper inside a blue PVC jacket. Both ends carry RJ45 plugs with 50 micron gold-plated contacts and snagless molded boots that protect the locking tabs. It meets TIA/EIA-568-C.2 Category 6 standards and carries UL and ETL verification plus RoHS compliance. Wiring follows the T568B pinout.

Suits home and office network links

The cable connects computers, routers, patch panels, cable modems and switches in typical indoor runs. The unshielded construction keeps it flexible for routing around corners and through cable managers. Installations that require shielded twisted pair, plenum-rated jacket or outdoor-rated materials should select a different cable type.

30-foot length sets the reach

At 30 feet this cable covers standard desk-to-wall or rack-to-patch-panel distances without excess slack. Measure the exact route before purchase because the fixed length cannot be shortened or extended without re-termination.

Highlights

  • Reliable gigabit links for home and office networks
  • 30 ft reach connects devices across rooms without excess slack
  • Snagless booted RJ45 plugs protect locking tabs from damage
  • 50 micron gold-plated contacts resist corrosion for lasting signal quality
  • UL and ETL verified to TIA/EIA-568-C.2 Cat6 standard

Specifications

BrandNippon Labs
Model60CAT6-30BL
TypeNetwork Ethernet Cables
CatCat6
Connector ARJ45
Connector BRJ45
Length30 ft.
ColorBlue
ShieldedUnshielded Twisted Pair
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded bare copper
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight0.68 kg
Package size229 × 203 × 64 mm

Questions about this item

How do I verify the 30 ft Cat6 cable is performing to standard after I plug it in?

Check that the link negotiates at 1 Gbps or higher on both ends and run a cable certifier or the built-in diagnostics on your router or switch to confirm TIA/EIA-568-C.2 compliance.

What comes with the 60CAT6-30BL and what must I supply myself?

The box contains the 30 ft blue UTP patch cable with RJ45 connectors on both ends; you only need to provide the networking devices such as a router, switch or patch panel.

Which version of the 60CAT6-30BL should I choose for a typical home or office run?

The single listed version is a 30 ft Cat6 UTP cable with 24 AWG stranded copper, 50 micron gold-plated contacts, snagless boots and T568B wiring, suited for most indoor patching needs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.