We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6 ethernet cable ten feet long with RJ45 plugs and molded boots

Nippon Labs

Nippon Labs 60CAT6-10BL Cat6 UTP network ethernet cable 10 ft blue 24AWG

SKU CH-63AP-WHRY5 MPN 60CAT6-10BL

Cat6 UTP patch cable with gold-plated RJ45 connectors, 10 ft length, UL/ETL verified

  • TypeNetwork Ethernet Cables
  • CatCat6
  • Connector ARJ45
  • Connector BRJ45
  • Length10 ft.
  • ColorBlue
  • Reliable gigabit links from 24 AWG stranded copper conductors
  • Durable connections via 50 micron gold-plated RJ45 contacts
  • Snagless boot design protects locking tabs from accidental damage
  • Standards-compliant build verified by UL and ETL to TIA/EIA-568-C.2
  • RoHS-compliant PVC jacket suits home and office installations

10 ft Cat6 UTP patch cable

This 10 ft Cat6 unshielded twisted-pair cable uses 24 AWG stranded bare copper conductors and RJ45 plugs with 50 micron gold-plated contacts. It is built for home and office network connections between computers, routers, patch panels, cable modems and switches. The PVC jacket and snagless molded boot protect the locking tabs from damage.

Replacing older Cat5 or Cat5e runs

The jump is worth it when you need the higher bandwidth headroom that the Cat6 specification provides for gigabit and multi-gigabit links. It meets TIA/EIA-568-C.2 standards verified by UL and ETL and follows T568B wiring. RoHS compliance confirms restricted substance limits.

Check connector spacing and cable routing

Verify that the RJ45 ports on your devices accept standard boot dimensions and that a 10 ft run reaches between your endpoints without tension. Ensure the pathway avoids sharp bends or crushing loads that could degrade the unshielded pairs. No special tools are required beyond a standard RJ45 crimp if you re-terminate.

Highlights

  • Reliable gigabit links from 24 AWG stranded copper conductors
  • Durable connections via 50 micron gold-plated RJ45 contacts
  • Snagless boot design protects locking tabs from accidental damage
  • Standards-compliant build verified by UL and ETL to TIA/EIA-568-C.2
  • RoHS-compliant PVC jacket suits home and office installations

Specifications

BrandNippon Labs
Model60CAT6-10BL
TypeNetwork Ethernet Cables
CatCat6
Connector ARJ45
Connector BRJ45
Length10 ft.
ColorBlue
ShieldedUnshielded Twisted Pair
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded bare copper
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight0.21 kg
Package size229 × 178 × 51 mm

Questions about this item

Will the 10 ft length and 24 AWG stranded copper conductors reach my router without strain?

The cable is 10 ft long with flexible 24 AWG stranded bare copper conductors, so it routes easily around corners and through desk grommets for typical home or office runs.

How do I seat the RJ45 plugs with 50 micron gold contacts without damaging the locking tabs?

Push each RJ45 plug straight in until the snagless boot clicks; the molded bubble shield stops the tab from catching, so do not rock or angle the connector during insertion.

When should I replace this Cat6 UTP patch cable?

Replace it if the PVC jacket shows cracks, the gold contacts look corroded, or the snagless boot splits — any of which can degrade the T568B wiring and TIA/EIA-568-C.2 performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.