We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten short black Cat6 patch cables with snagless boots and gold RJ45 plugs

Nippon Labs

Nippon Labs 60CAT6-0.5BK-10P network ethernet cable Cat6 0.5 ft 10 pack black

SKU CH-T9HK-682D3 MPN 60CAT6-0.5BK-10P

Ten 0.5 ft Cat6 UTP patch cables with gold-plated RJ45 connectors and snagless boots

  • TypeNetwork Ethernet Cables
  • CatCat6
  • Connector ARJ45
  • Connector BRJ45
  • Length0.5 ft.
  • ColorBlack
  • Ten cables keep a rack tidy with short links
  • 5 ft length avoids slack in dense patch panels
  • Cat6 UTP rated for gigabit speeds in home and office
  • Gold-plated RJ45 contacts resist corrosion for reliable signal
  • Snagless boots protect locking tabs during frequent moves

Ten-pack of short Cat6 patch cables

This pack contains ten Category 6 patch cables, each measuring .5 ft. They are built for home and office network connections where only a very short link is required. The cables suit builders wiring patch panels, switches or cable modems inside a single rack or desk enclosure. Buyers needing longer runs for room-to-room cabling should choose a different length.

UTP construction with gold-plated RJ45 plugs

Each cable uses four twisted pairs of 24 AWG stranded bare copper inside a PVC jacket. Both ends carry RJ45 connectors with 50 micron gold-plated contacts and a snagless boot that protects the locking tab. The unshielded design keeps the cable flexible for tight routing, while the T568B wiring ensures compatibility with standard Gigabit Ethernet ports. No shield drain wire is present, so the cables do not require grounded patch panels.

UL and ETL verified for safety and performance

The cables comply with TIA/EIA-568-C.2 Cat.6 standards and carry UL and ETL verification. They also meet RoHS requirements. In normal use the PVC jacket and low-voltage conductors produce no measurable heat or audible noise. Power draw is limited to the negligible PoE current carried by connected devices, so the cables add no thermal load to a rack or cabinet.

Highlights

  • Ten cables keep a rack tidy with short links
  • 5 ft length avoids slack in dense patch panels
  • Cat6 UTP rated for gigabit speeds in home and office
  • Gold-plated RJ45 contacts resist corrosion for reliable signal
  • Snagless boots protect locking tabs during frequent moves

Specifications

BrandNippin Labs
Model60CAT6-0.5BK-10P
TypeNetwork Ethernet Cables
CatCat6
Connector ARJ45
Connector BRJ45
Length0.5 ft.
ColorBlack
ShieldedUnshielded Twisted Pair
Wire Gauge24 AWG
FeaturesConductor: 4-pair UTP (Unshielded Twisted Pair) 24 AWG stranded bare copper
Connectors: RJ45 plug with 50 micron gold plating contacts
Jacket: PVC
Certification: Compliant with TIA/EIA standard by UL and ETL; RoHS Compliant
Wiring: T568B standard
Shipping weight0.45 kg
Package size152 × 127 × 51 mm

Questions about this item

Does the 0.5 ft length limit where I can place devices in a rack?

At 0.5 ft the cable only reaches equipment that sits side by side or in the same rack unit, so plan device positions before installing.

Will the PVC jacket and 24 AWG conductors get warm when PoE runs continuously?

The 24 AWG stranded copper and PVC jacket are rated for normal PoE loads; no extra heat is expected under typical daily operation.

Do my switch and router need RJ45 ports wired to the T568B standard?

Yes, both ends use RJ45 plugs terminated to the T568B wiring scheme, so the connected ports must follow that pinout.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.