Nippon Labs 60CAT5E-15BK-10P network ethernet cable 10 pack 15 ft black 24 AWG

Ready-to-deploy Cat5E patch cables

This pack contains ten 15 ft black cables terminated with RJ45 plugs on both ends. They are built for home and office networks where gigabit speeds over copper are sufficient. Each cable uses four twisted pairs of 24 AWG stranded bare copper inside a PVC jacket. The bundle suits installers who need multiple drops of identical length.

Snagless boots protect the locking tabs

The molded bubble boot slides over the RJ45 latch so it cannot catch on adjacent ports or cable trays during insertion. Connectors carry 50 micron gold-plated contacts and follow the T568B wiring scheme. Because the cables are unshielded UTP, they should be routed away from strong electromagnetic sources such as fluorescent ballasts or power conductors. No tools are required beyond a standard RJ45 port.

Ten 15 ft runs cover typical desk-to-switch

The 15 ft length reaches from a wall outlet or patch panel to a workstation without excessive slack in most cubicle or home-office layouts. Cat5E bandwidth handles 1 Gbps Ethernet and PoE loads defined by the TIA/EIA-568-C.2 standard. Runs longer than 15 ft or environments needing alien-crosstalk immunity will require shielded or higher-category cable instead.