We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat6 bulk ethernet cable in 1000 ft pull box, stranded 24 AWG bare copper conductors

Nippon Labs

Nippon Labs 50CP-C6-ST-1K-WH network ethernet cable Cat6 1000 ft White 24 AWG stranded

SKU CH-EP4V-Z038F MPN 50CP-C6-ST-1K-WH

Bulk Cat6 cable on a 1000 ft pull box with stranded 24 AWG bare copper conductors for patch cables and 10 Gigabit Ethernet up to 55 metres

  • TypeNetwork Ethernet Cables
  • Cat6
  • Length1000 ft.
  • ColorWhite
  • Wire Gauge24 AWG
  • FeaturesFor making patch cables and connecting between ethernet and
  • Ready for 10/100/1GbE networks with Cat6 performance
  • Stranded 24 AWG conductors make custom patch cables easy
  • Bare copper wires ensure reliable signal transmission
  • CM FT4 rating meets commercial in-wall fire safety
  • 1000 ft pull box simplifies large installation projects

Bulk Cat6 cable for custom runs

This 1000 ft white Cat6 bulk cable uses 24 AWG bare copper stranded wire. It is supplied in a pull box for easy dispensing during installation. The cable carries CM FT4 fire ratings and meets ANSI/TIA-568-C.2 standards. It is UL listed, cUL listed and ETL verified for safety compliance.

Installers building patch cables or horizontal drops

The stranded construction makes the cable flexible for termination and routing in tight spaces. It supports 10/100/1GbE applications and 10 Gigabit Ethernet for distances up to 55 meters. Builders who need solid conductor cable for long permanent links should look at a different construction. Buyers requiring outdoor or plenum ratings will need a jacket type not offered here.

55 meter limit for 10 Gigabit Ethernet

The specification that decides suitability is the 55 meter maximum distance for 10 Gigabit Ethernet operation. At 1GbE the cable runs the full 100 meter channel length. If your 10G links exceed 55 meters, this Cat6 bulk cable will not meet the required performance.

Highlights

  • Ready for 10/100/1GbE networks with Cat6 performance
  • Stranded 24 AWG conductors make custom patch cables easy
  • Bare copper wires ensure reliable signal transmission
  • CM FT4 rating meets commercial in-wall fire safety
  • 1000 ft pull box simplifies large installation projects

Specifications

BrandNippon Labs
Model50CP-C6-ST-1K-WH
TypeNetwork Ethernet Cables
Cat6
Length1000 ft.
ColorWhite
Wire Gauge24 AWG
FeaturesFor making patch cables and connecting between ethernet and network devices
10/100/1GbE applications (10 Gigabit Ethernet for distances up to 55 meters)
24AWG
Bare copper conductors
Stranded wire
CM FT4 rated
Conforms to ANSI/TIA-568-C.2 standards
Black, Blue, Green, Gray, Red, White PVC jacket options
1000ft pull box
UL listed, cUL listed, ETL verified
Shipping weight8.85 kg
Package size381 × 343 × 203 mm

Questions about this item

What conduit or pathway size is needed for the 1000 ft pull box?

The cable is supplied in a 1000 ft pull box; allow enough conduit fill for 24 AWG stranded conductors with a CM FT4 rated PVC jacket.

How do I terminate the stranded conductors, and what mistake should I avoid?

Use connectors rated for stranded 24 AWG wire and follow the ANSI/TIA-568-C.2 wiring sequence; do not use solid-conductor plugs.

When will the cable jacket need inspection or replacement?

The CM FT4 rated PVC jacket is rated for in-wall use; inspect after any pulling tension or if the cable exceeds 55 metres for 10 Gigabit Ethernet links.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.