Nippon Labs
Nippon Labs 50CP-350-SD-1K-GY Cat5e 1000ft 24AWG CMR network ethernet cable
1000 ft solid bare-copper Cat5e cable rated 350 MHz, CMR riser-rated, 24 AWG, UL listed, ANSI/TIA-568-C.2 compliant
- TypeNetwork Ethernet Cables
- Cat5E
- Length1000 ft.
- ColorGray
- Wire Gauge24 AWG
- FeaturesFor horizontal or backbone cabling systems 24AWG Bare copper
- Solid single-strand conductors support reliable long-distance runs up to 100 meters
- CMR riser rating (UL-1666) permits vertical installation between floors in non-plenum areas
- Bare copper 24 AWG cores meet ANSI/TIA-568-C.2 Category 5e performance to 350 MHz
- 1000-foot pull-box with 2-foot markings speeds bulk horizontal and backbone deployment
- UL listing confirms safety compliance for commercial and residential structured cabling
Nippon Labs Cat5e 1000 ft bulk cable
This Nippon Labs Cat5e bulk cable supplies 1000 ft of solid 24 AWG bare copper wire in a gray pull box. It is CMR rated to UL-1666 and conforms to ANSI/TIA-568-C.2 standards for structured wiring. The cable is UL listed and marked at 2 ft intervals for easy measurement during installation. It is designed for horizontal or backbone cabling systems in commercial or residential buildings.
Suited for installers pulling riser-rated runs
The solid conductor construction makes this cable appropriate for permanent horizontal or backbone runs up to 100 meters where cables are terminated on patch panels or keystone jacks. It is not suited for patch cords or flexible connections that require stranded wire for repeated movement. Buyers who need plenum-rated CMP cable for air-handling spaces should look at a different product. Buyers who need Category 6 or higher bandwidth should also look elsewhere.
350 MHz tested bandwidth
The cable is tested to 350 MHz, providing headroom above the standard Cat5e requirement for 100 MHz operation. This bandwidth figure is the key specification that determines whether the cable will support the desired network speeds over the installed distance.
Highlights
- Solid single-strand conductors support reliable long-distance runs up to 100 meters
- CMR riser rating (UL-1666) permits vertical installation between floors in non-plenum areas
- Bare copper 24 AWG cores meet ANSI/TIA-568-C.2 Category 5e performance to 350 MHz
- 1000-foot pull-box with 2-foot markings speeds bulk horizontal and backbone deployment
- UL listing confirms safety compliance for commercial and residential structured cabling
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 50CP-350-SD-1K-GY |
| Type | Network Ethernet Cables |
| Cat | 5E |
| Length | 1000 ft. |
| Color | Gray |
| Wire Gauge | 24 AWG |
| Features | For horizontal or backbone cabling systems 24AWG Bare copper conductors Solid wire CMR rated (UL-1666) Conforms to ANSI/TIA-568-C.2 standards UL listed |
| Shipping weight | 8.17 kg |
| Package size | 381 × 343 × 203 mm |
Questions about this item
What conduit or pathway size fits a 1000 ft pull box of 24 AWG solid Cat5e cable?
The cable is supplied in a pull box designed for standard horizontal and backbone runs; plan conduit fill for 24 AWG solid conductors and the 1000 ft length.
What is the correct termination method for the solid 24 AWG conductors in this CMR cable?
Use IDC jacks or patch panels rated for solid 24 AWG wire, maintain pair twists to the connector, and follow the TIA-568 colour code for either A or B wiring.
When should this CMR-rated Cat5e cable be replaced or re-certified?
Re-test after any physical damage, water ingress, or if certification shows insertion loss or NEXT margins below the 350 MHz Category 5e limits.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114364BTC
In stock
