Nippon Labs
Nippon Labs 30POW-10W1-C14C7-02 2 ft 18 AWG C14 to C7 computer power extension cord
A 2 ft 18 AWG extension cord with C14 to C7 connectors, rated 10 A, for powering laptops and media devices from a PDU or UPS
- TypeOthers
- ColorBlack
- Length2 ft.
- Connector Number2
- Connector DetailIEC-60320-C14 to IEC-60320-C7
- Wire Gauge18 AWG
- Connect laptops or media players to rack PDUs using the IEC-60320-C14 to IEC-60320-C7 connectors
- Extend reach by 2 ft in tight cabinet spaces with the compact two-foot length
- Handle 10 A loads safely with 18 AWG UL SPT-2 conductors rated for data-centre use
- Reduce cable fatigue through fully moulded strain relief on both connector ends
- Meet compliance requirements with UL and cUL listings plus RoHS and REACH material adherence
C14-to-C7 extension for data-centre power
This two-foot cord connects devices with an IEC-60320-C7 inlet to a PDU or UPS that provides a C14 outlet. The 18 AWG SPT-2 conductors are rated for 10 A and carry UL and cUL listings. Fully moulded strain relief protects the joints in rack environments.
Practical limits of the C14/C7 interface
The C7 connector is non-polarised and ungrounded, so it cannot be used with equipment that requires an earth connection. Current is limited to the 10 A rating of the 18 AWG wire and the connector specification. Voltage compatibility follows the IEC-60320 standard for the attached devices.
Check your device inlet and rack layout
Verify that the equipment you intend to power uses a C7 two-slot inlet and draws no more than 10 A. Confirm the PDU or UPS presents a C14 socket and that the two-foot length reaches between the mounted units without tension. Ensure the rack power budget accommodates the additional load.
Highlights
- Connect laptops or media players to rack PDUs using the IEC-60320-C14 to IEC-60320-C7 connectors
- Extend reach by 2 ft in tight cabinet spaces with the compact two-foot length
- Handle 10 A loads safely with 18 AWG UL SPT-2 conductors rated for data-centre use
- Reduce cable fatigue through fully moulded strain relief on both connector ends
- Meet compliance requirements with UL and cUL listings plus RoHS and REACH material adherence
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-C14C7-02 |
| Type | Others |
| Color | Black |
| Length | 2 ft. |
| Connector Number | 2 |
| Connector Detail | IEC-60320-C14 to IEC-60320-C7 |
| Wire Gauge | 18 AWG |
| Conductor | UL SPT-2 18 AWG. x 2C |
| Features | Power your laptops, VCRs, DVD players and other devices that use a 2-slot non-polarized cord to a PDU or UPS with C14 type input in a data center. This heavy duty 18 AWG power cord is fully molded for durability. UL and cUL listed. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.14 kg |
| Package size | 127 × 51 × 25 mm |
Questions about this item
Should I choose the 2 ft length or a longer cord for my rack setup?
The 2 ft length keeps cable clutter low inside a rack; pick a longer version only if the PDU or UPS sits farther than 2 ft from the device inlet.
What does the 10 A rating mean when I plug this into a live UPS?
The 10 A rating is the maximum continuous current the 18 AWG conductors can carry safely; do not exceed it or the cord can overheat.
How does the IEC-60320-C14 to IEC-60320-C7 connection limit what I can power?
The C14 plug fits a standard PDU or UPS outlet while the C7 connector mates only with two-slot non-polarised inlets found on laptops, VCRs, DVD players and similar low-power gear.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00113914BTC
In stock
