We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft power cord with thick 12 AWG cable NEMA 5-20P plug to C19 connector

Nippon Labs

Nippon Labs 30POW-10W1-520C19-10 computer power cord 10 ft 12 AWG NEMA 5-20P to C19

SKU CH-KTVQ-WP509 MPN 30POW-10W1-520C19-10

Delivers 20 A at 250 V from a NEMA 5-20P plug to a C19 inlet using 12 AWG conductors over 10 ft

  • ColorBlack
  • Length10 ft.
  • Connector DetailNEMA 5-20P TO C19
  • Wire Gauge12 AWG
  • Thicker 12 AWG wire handles 20 A continuous load
  • NEMA 5-20P plug fits 20 A branch circuits
  • IEC C19 connector mates with high-power server inlets
  • Ten-foot length reaches floor-mounted PDUs from rack gear
  • Rated 250 V for worldwide voltage compatibility

Cord rating and connectors

This 10 ft power cord uses 12 AWG conductors and carries a NEMA 5-20P plug on one end and an IEC 60320 C19 connector on the other. It is rated for 20 A at 250 V and suits equipment that requires a C19 inlet. The black SJT jacket provides standard durability for indoor rack or desktop use.

Sustained current handling

The 12 AWG wire gauge supports continuous 20 A loads without the voltage drop that lighter cords exhibit during extended operation. This makes the cable appropriate for servers, UPS units or PDUs that draw near their rated current for long periods rather than brief peaks.

Compatibility checks

Verify that your power source provides a NEMA 5-20R receptacle and that the target device accepts a C19 plug. Confirm the 10 ft length reaches between your outlet and the equipment without strain. Ensure the 20 A circuit rating matches your installation requirements.

Highlights

  • Thicker 12 AWG wire handles 20 A continuous load
  • NEMA 5-20P plug fits 20 A branch circuits
  • IEC C19 connector mates with high-power server inlets
  • Ten-foot length reaches floor-mounted PDUs from rack gear
  • Rated 250 V for worldwide voltage compatibility

Specifications

BrandNippon Labs
ColorBlack
Length10 ft.
Connector DetailNEMA 5-20P TO C19
Wire Gauge12 AWG
Shipping weight0.39 kg
Package size191 × 76 × 51 mm

Questions about this item

Does the 12 AWG cord stay cool during continuous 20 A operation?

The 12 AWG conductors are rated for 20 A at 250 V, so they remain within safe temperature limits under full load.

Which devices must already have a C19 inlet to use this cord?

Any server, UPS or PDU fitted with an IEC 60320 C19 receptacle will accept the C19 connector directly.

Can the 10 ft length reach from a floor-mounted PDU to a rack-mounted unit?

At 10 ft the cord spans typical rack-to-floor distances without tension, leaving slack for cable management.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.