We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft power extension cord with moulded C14 to C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-16-02210 computer power extension cord 10 ft 16 AWG C14 to C13 13A 250V black

SKU CH-5WRN-J6Z7K MPN 30POW-10W1-16-02210

A 10 ft, 16 AWG extension cord with C14 to C13 connectors rated 13A at 250V for powering computer equipment from a PDU or UPS

  • TypePower Extension Cable
  • ColorBlack
  • Length10 ft.
  • Connector Number2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Amp/Vo
  • Wire Gauge16 AWG
  • Extend reach by 10 ft for flexible placement
  • 16 AWG conductors handle 13 A at 250 V safely
  • C14 to C13 connectors fit PDU and UPS ports
  • Fully moulded SJT jacket resists wear in data-centre use
  • UL, cUL and CSA approved for code compliance

Ten-foot C14-to-C13 reach

This Nippon Labs extension cord adds ten feet between a C14 inlet and a C13 plug. It suits technicians who need extra length when connecting servers or workstations to a rack PDU or UPS. The 16 AWG conductors are rated for 13 A at 250 V.

Fully moulded SJT construction

The cable uses UL-listed SJT jacket material with three 16 AWG conductors. That heavy-duty build resists abrasion and repeated bending in dense cabinet runs. UL, cUL and CSA approvals confirm compliance for continuous operation at the rated load.

Black IEC-60320 connectors

Both ends carry standard IEC-60320-C14 and IEC-60320-C13 moulded housings in black. The straight connectors fit side-by-side on dense PDU strips without blocking adjacent outlets. RoHS and REACH compliance covers restricted substances in all materials.

Highlights

  • Extend reach by 10 ft for flexible placement
  • 16 AWG conductors handle 13 A at 250 V safely
  • C14 to C13 connectors fit PDU and UPS ports
  • Fully moulded SJT jacket resists wear in data-centre use
  • UL, cUL and CSA approved for code compliance

Specifications

BrandNippon Labs
Model30POW-10W1-16-02210
TypePower Extension Cable
ColorBlack
Length10 ft.
Connector Number2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Amp/Voltage Rating: 13A/250V
Wire Gauge16 AWG
ConductorUL SJT 16 AWG. x 3C
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 16 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.41 kg
Package size241 × 170 × 25 mm

Questions about this item

Does the 16 AWG cord run warm when powering a 13 A server load all day?

The 16 AWG SJT conductors are rated for 13 A at 250 V, so normal continuous loads within that rating will not cause excessive heating.

What equipment must I already have to use this IEC-60320-C14 to IEC-60320-C13 extension?

You need a device with a C14 inlet and a power source or PDU with a C13 outlet, or vice versa, to plug each end into.

Will the 10 ft length and C13/C14 connectors work with my older UPS that only has C13 outlets?

Yes, the C14 plug fits the UPS C13 outlets and the C13 connector accepts the older equipment's C14 inlet, extending the reach by 10 ft.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.