Nippon Labs
Nippon Labs 30POW-10W1-14-19208 14 AWG C20 to C19 computer power cord 8 ft
An 8 ft 14 AWG cord connects a C19 device to a C20 PDU or UPS at 15A/250V
- TypePower cord
- ColorBlack
- Length8 ft.
- Connector Number2
- SpecificationsConnector A: IEC-60320-C20 Connector B: IEC-60320-C19 Amp/Vo
- Wire Gauge14 AWG
- Heavy-duty 14 AWG wire supports 15 A at 250 V for reliable server power
- C20 to C19 connectors link equipment to PDU or UPS in data-centre racks
- UL and cUL listed conductors meet recognised safety standards for peace of mind
- Fully moulded strain relief protects connections during frequent rack moves
- RoHS and REACH compliant materials reduce hazardous substances in the supply chain
14 AWG C20 to C19 power cord
This 8 ft cord links a C19 inlet on a server or workstation to a C20 outlet on a PDU or UPS. The 14 AWG SJT conductors are rated for 15A at 250V and carry UL and cUL listings. It is built for data-centre rack installations where reliable mains distribution is required.
Extends reach inside a rack
The jumper adds length to an existing power lead so equipment can sit farther from the power strip without daisy-chaining thinner cables. Its fully moulded ends resist accidental disconnection when trays slide. The cord does not convert voltage or change phase; it simply bridges the two IEC-60320 connectors.
Steady 15A capacity under load
Because the copper cross-section matches the 15A rating, the cord runs at its rated current continuously without overheating the insulation. The SJT jacket remains flexible after repeated thermal cycles in a heated aisle. No active cooling or derating is needed for the stated ampacity.
Highlights
- Heavy-duty 14 AWG wire supports 15 A at 250 V for reliable server power
- C20 to C19 connectors link equipment to PDU or UPS in data-centre racks
- UL and cUL listed conductors meet recognised safety standards for peace of mind
- Fully moulded strain relief protects connections during frequent rack moves
- RoHS and REACH compliant materials reduce hazardous substances in the supply chain
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-14-19208 |
| Type | Power cord |
| Color | Black |
| Length | 8 ft. |
| Connector Number | 2 |
| Specifications | Connector A: IEC-60320-C20 Connector B: IEC-60320-C19 Amp/Voltage Rating: 15A/250V |
| Wire Gauge | 14 AWG |
| Conductor | Conductor: UL SJT 14 AWG. x 3C |
| Features | Connect C19 receptacle to computer, server or other devices and plug C20 connector into a PDU or UPS in a data center. Extend the length of an existing power cord for more flexibility. This heavy duty 14 AWG power cord is fully molded for durability. UL and cUL listed. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.32 kg |
| Package size | 178 × 89 × 25 mm |
Questions about this item
How long can I run this 14 AWG cord at 15 A before the conductors overheat?
The UL SJT 14 AWG three-conductor cable is rated for continuous 15 A at 250 V, so sustained loads up to that limit will not cause overheating.
Will the cord become warm or emit noise when powering a server all day?
A properly loaded 14 AWG SJT cord runs cool and silent; any warmth indicates the 15 A rating is being exceeded.
Which devices must already have C19 and C20 inlets for this cord to connect them?
You need equipment with an IEC-60320-C19 receptacle (server, PDU, UPS) and a mating IEC-60320-C20 inlet on the other end.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114711BTC
In stock
