Nippon Labs
Nippon Labs 30POW-10W1-14-04215 14 AWG 15 ft computer power extension cord
A 15 ft NEMA 5-15P to 5-15R extension cord with 14 AWG SJT conductors rated 15 A at 125 V for 1875 W, fully moulded and UL and cUL listed
- TypePower
- ColorBlack
- Length15 ft.
- SpecificationsConnector A: NEMA 5-15P Connector B: NEMA 5-15R Amp/Voltage
- Wire Gauge14 AWG
- ConductorSJT 14 AWG. x 3C
- Extends power reach by 15 ft with NEMA 5-15P to 5-15R connectors
- 14 AWG gauge supports 15 A at 125 V for up to 1875 W
- Fully moulded SJT construction resists wear and strain
- VW-1 75 °C and FT-2 60 °C ratings suit demanding environments
- UL and cUL listed plus RoHS and REACH compliant materials
14 AWG 15 ft Power Extension Cord
This 14 AWG extension cord adds 15 ft of reach between a NEMA 5-15P plug and a NEMA 5-15R receptacle. It is rated for 15 A at 125 V, delivering up to 1875 W. The SJT 14 AWG three-conductor cable is fully moulded for mechanical durability. UL and cUL listings confirm compliance with North American safety standards.
VW-1 75 °C and FT-2 60 °C Temperature Ratings
The cord carries a VW-1 flame-test rating at 75 °C (167 °F) and an FT-2 rating at 60 °C (140 °F), so the insulation resists degradation during continuous operation at rated load. RoHS and REACH compliance means restricted substances are absent from all materials. These certifications support reliable performance in typical indoor computing and office environments.
Replaces Shorter Factory Cords or Damaged Leads
Use this cord when the original power lead on a desktop, monitor or peripheral is too short to reach the nearest outlet or when an existing cord shows wear. The 15 ft length suits most desk-to-wall runs without excessive slack. It is not intended for permanent installation inside walls, for outdoor exposure, or for loads exceeding the 15 A rating.
Highlights
- Extends power reach by 15 ft with NEMA 5-15P to 5-15R connectors
- 14 AWG gauge supports 15 A at 125 V for up to 1875 W
- Fully moulded SJT construction resists wear and strain
- VW-1 75 °C and FT-2 60 °C ratings suit demanding environments
- UL and cUL listed plus RoHS and REACH compliant materials
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-14-04215 |
| Type | Power |
| Color | Black |
| Length | 15 ft. |
| Specifications | Connector A: NEMA 5-15P Connector B: NEMA 5-15R Amp/Voltage Rating: 15A/125V Wattage Rating: 1875W |
| Wire Gauge | 14 AWG |
| Conductor | SJT 14 AWG. x 3C |
| Features | Extend the length of an existing power cord or outlet for more flexibility. This heavy-duty 14 AWG power cord is fully molded for durability. VW-1 75°C (167°F) and FT-2 60°C (140°F) temperature rating. UL and cUL listed. All relevant materials are complied with RoHS and REACH directives. |
| Shipping weight | 0.45 kg |
| Package size | 203 × 76 × 51 mm |
Questions about this item
Does the 14 AWG wire and 15 A rating keep the cord cool when a workstation draws full load all day?
The 14 AWG SJT conductors are rated for 15 A at 125 V (1875 W) and carry VW-1 75 °C (167 °F) plus FT-2 60 °C (140 °F) temperature ratings, so sustained full-load operation stays within the certified thermal limits.
What wall outlet and device inlet must already be present for this NEMA 5-15P to 5-15R cable to work?
You need a standard North American NEMA 5-15R wall receptacle (the common three-prong 125 V outlet) and a device or power strip with a matching NEMA 5-15P plug; the cable simply bridges between them.
Can I safely use this 15 ft extension with an older power strip that only has a 10 A breaker?
Yes — the strip’s 10 A breaker will trip before the cord reaches its 15 A limit, so the 14 AWG cable remains well within its rated capacity and the VW-1/FT-2 insulation ratings are not exceeded.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



