We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft power extension cord with C14 to C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-14-02206 computer power extension cord 6 ft 14 AWG C14 to C13 black

SKU CH-G9D4-2GBFW MPN 30POW-10W1-14-02206

A 6 ft 14 AWG extension cable with IEC C14 to C13 connectors extends power cords for PDU or UPS connections in data centres

  • TypeExtension Cable
  • ColorBlack
  • Length6 ft.
  • Connector Number2
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13
  • Wire Gauge14 AWG
  • Extend existing power cords for flexible equipment placement
  • 14 AWG conductors support 15 A at 250 V for reliable delivery
  • Fully moulded C14 to C13 connectors resist damage in racks
  • UL cUL listed and CSA approved for safety compliance
  • RoHS and REACH compliant materials reduce hazardous substances

Product and purpose

This Nippon Labs extension cord adds 6 ft of reach between a C14 inlet and a C13 outlet. It is built for IT equipment that draws power from a PDU or UPS in a rack or data-centre environment.

Who it suits and who it does not

The 14 AWG conductors and 15 A rating suit servers, switches and workstations that stay within that current limit. Builders who need a higher ampacity or a different connector pairing should look at other cables.

Capacity and headroom

The cord handles continuous loads up to 15 A at 250 V, so typical rackmount gear runs with margin. It reaches its limit when the connected device draws more than 15 A or requires a connector type other than C13.

Highlights

  • Extend existing power cords for flexible equipment placement
  • 14 AWG conductors support 15 A at 250 V for reliable delivery
  • Fully moulded C14 to C13 connectors resist damage in racks
  • UL cUL listed and CSA approved for safety compliance
  • RoHS and REACH compliant materials reduce hazardous substances

Specifications

BrandNippon Labs
Model30POW-10W1-14-02206
TypeExtension Cable
ColorBlack
Length6 ft.
Connector Number2
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Wire Gauge14 AWG
ConductorUL SJT 14 AWG. x 3C
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 14 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.30 kg
Package size191 × 161 × 22 mm

Questions about this item

What type of power inlet must my device have to accept the IEC-60320-C13 connector on this cord?

The device needs a standard IEC-60320-C14 inlet, which is the common three-pin recessed socket found on most PC power supplies, monitors, and server gear.

Will the 14 AWG conductors on this extension handle the same 15 A, 250 V load as the 14 AWG cord already feeding my UPS?

Yes, the UL SJT 14 AWG x 3C construction is rated for 15 A at 250 V, matching the capacity of a typical 14 AWG feed cord so the extension does not reduce the circuit rating.

How can I confirm the cord is fully seated and delivering power after I connect it between the PDU and my server?

Verify the C14 plug clicks firmly into the PDU outlet and the C13 connector locks into the server inlet, then power on the server and check that its front-panel LEDs illuminate normally.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.