We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft power cord with C20 and C19 connectors

Nippon Labs

Nippon Labs 30POW-10W1-12-19210 10 ft 12 AWG C20 to C19 computer power cord

SKU CH-DEVN-5SANY MPN 30POW-10W1-12-19210

A 10 ft, 12 AWG cord with C20 to C19 connectors rated 20A/250V for linking servers to PDUs or extending existing power runs

  • TypePower
  • ColorBlack
  • Length10 ft.
  • Connector Number2
  • Connector DetailIEC-60320-C20 to IEC-60320-C19
  • SpecificationsConnector A: IEC-60320-C20 Connector B: IEC-60320-C19 Conduc
  • Delivers 20 A at 250 V for high-power servers
  • 12 AWG conductors handle heavy current without voltage drop
  • C20 to C19 connectors link equipment to PDU or UPS
  • Ten-foot length adds routing flexibility in racks
  • UL and cUL listed for verified safety compliance

Universal jumper cord for data-centre gear

This 10 ft cord links a C19 receptacle on a server or rack device to a C20 inlet on a PDU or UPS. The 12 AWG conductors carry up to 20 A at 250 V, matching typical high-density power distribution needs. It is built to UL and cUL listings and complies with RoHS and REACH material rules. The fully moulded ends resist strain in dense cabinet layouts.

Fits between rack equipment and power distribution

The C20 plug seats in a PDU or UPS outlet while the C19 connector feeds a server, switch or storage array. The three-metre length adds routing slack without excess cable mass that blocks airflow. No adapter is required because both ends follow the IEC 60320 standard used in enterprise cabinets. The heavy-duty SJT jacket withstands repeated insertion cycles in managed environments.

Handles continuous 20 A load without derating

The 12 AWG copper core maintains rated ampacity during sustained operation inside warm aisles. UL SJT insulation is tested for long-term thermal stability at the full 250 V rating. Moulded strain relief prevents conductor fatigue where the cable flexes at the connector face. Builders needing a longer run or a different connector gender will need a separate cord.

Highlights

  • Delivers 20 A at 250 V for high-power servers
  • 12 AWG conductors handle heavy current without voltage drop
  • C20 to C19 connectors link equipment to PDU or UPS
  • Ten-foot length adds routing flexibility in racks
  • UL and cUL listed for verified safety compliance

Specifications

BrandNippon Labs
Model30POW-10W1-12-19210
TypePower
ColorBlack
Length10 ft.
Connector Number2
Connector DetailIEC-60320-C20 to IEC-60320-C19
SpecificationsConnector A: IEC-60320-C20
Connector B: IEC-60320-C19
Conductor: UL SJT 12 AWG. x 3C
Amp/Voltage Rating: 20A/250V
Wire Gauge12 AWG
ConductorUL SJT 12 AWG. x 3C
FeaturesConnect C19 receptacle to computer, server or other devices and plug C20 connector into a PDU or UPS in a data center.
Extend the length of an existing power cord for more flexibility.
This heavy duty 12 AWG power cord is fully molded for durability.
UL and cUL listed.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.39 kg
Package size191 × 76 × 51 mm

Questions about this item

How long can I run the 12 AWG conductors at the full 20 A rating before heat becomes the limiting factor?

The cord uses UL SJT 12 AWG × 3C conductors rated 20 A at 250 V, so sustained loads up to that rating are within the listed ampacity.

Will the fully moulded C20 and C19 ends or the SJT jacket add noticeable heat or noise when the cord powers a server all day?

The cord is fully moulded with no moving parts, so it produces no noise and its temperature rise stays within UL limits at the rated 20 A load.

My rack PDU has C19 outlets — what must the server or UPS already provide for this C20-to-C19 jumper to connect?

The equipment end needs a C19 receptacle to accept the C20 plug, and the PDU or UPS side needs a C20 inlet to accept the C19 connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.