We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8 ft power extension cord with C14 and C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-02208 computer power extension cord 8 ft 18 AWG C14 to C13 10A 250V black

SKU CH-C3C5-124Z3 MPN 30POW-10W1-02208

An 8 ft 18 AWG extension cord with C14 to C13 connectors extends power cables for computer equipment, PDUs or UPS units and is UL, cUL listed and CSA approved

  • TypeAC Power Extension Cable
  • ColorBlack
  • Length8 ft.
  • Connector Number2
  • Connector DetailIEC-60320-C14 to IEC-60320-C13
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Conduc
  • Extend cord reach for flexible equipment placement
  • Connect servers to PDU or UPS in data centres
  • Fully moulded 18 AWG construction resists daily wear
  • UL, cUL listed and CSA approved for safety compliance
  • RoHS and REACH compliant materials reduce hazardous substances

Purpose and audience

This extension cord adds 8 ft of reach between a C14 inlet and a C13 outlet, letting you position servers, workstations or network gear farther from a PDU or UPS. It is built for data-centre racks and office cabinets where the stock cable falls short.

Sustained-load behaviour

The 18 AWG SVT conductors are rated for 10 A at 250 V, so the cord handles continuous current without overheating in typical rack densities. UL, cUL and CSA listings confirm the rating holds under prolonged operation.

Build and daily use

Fully moulded connectors resist strain from repeated rack insertions and cable-management pulls. The black SVT jacket meets RoHS and REACH material requirements, and the IEC-60320-C14 to IEC-60320-C13 pairing fits standard enterprise power strips without adapters.

Highlights

  • Extend cord reach for flexible equipment placement
  • Connect servers to PDU or UPS in data centres
  • Fully moulded 18 AWG construction resists daily wear
  • UL, cUL listed and CSA approved for safety compliance
  • RoHS and REACH compliant materials reduce hazardous substances

Specifications

BrandNippon Labs
Model30POW-10W1-02208
TypeAC Power Extension Cable
ColorBlack
Length8 ft.
Connector Number2
Connector DetailIEC-60320-C14 to IEC-60320-C13
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Conductor: UL SVT 18 AWG. x 3C
Amp/Voltage Rating: 10A/250V
Cable Color: Black Color
Wire Gauge18 AWG
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 18 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.30 kg
Package size178 × 89 × 25 mm

Questions about this item

Does the 18 AWG conductor and 10A rating generate noticeable heat when powering a server continuously?

The cable uses UL SVT 18 AWG conductors rated for 10A at 250V, so it runs cool under normal continuous loads within that limit.

What existing power cord connector must my device already have for this C14 plug to mate with it?

Your equipment needs a standard IEC-60320-C13 inlet, which is the three-pin receptacle found on most PC power supplies, monitors and rackmount gear.

Will this extension work reliably with an older UPS that only has C13 outlets?

Yes, the C14 plug on this cord inserts directly into any IEC-60320-C13 outlet, so it connects to legacy UPS or PDU units without adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.