Nippon Labs
Nippon Labs 30POW-10W1-02208-BU 18 AWG computer power extension cord 8 ft C14 to C13 10A 250V blue
An 8 ft blue extension cord with C14 to C13 connectors extends power cables for PDU or UPS connections in dense racks
- TypePower Extension Cable
- ColorBlue
- Length8 ft.
- Connector Number2
- Connector DetailIEC-60320-C14 to IEC-60320-C13
- SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Conduc
- Extend power reach for flexible equipment placement
- Connect servers to PDU or UPS in data centres
- Blue colour enables quick identification in dense racks
- Fully moulded 18 AWG construction resists daily wear
- UL, cUL and CSA certified for safety compliance
Extension for C13‑C14 devices
This 8 ft blue power extension cord carries a C14 plug on one end and a C13 connector on the other. It is built for technicians who need extra reach between rack‑mounted gear and a PDU or UPS. The 18 AWG SJT conductors are rated for 10 A at 250 V and are fully moulded for durability.
Fits standard IEC‑60320 outlets
The cord plugs directly into any C13 inlet and accepts any C14 plug, so it works with existing server, switch or workstation power cables. No adapters or special sockets are required. The blue jacket helps identify the circuit in a dense cabinet without adding bulk.
Rated for continuous 10 A load
UL, cUL and CSA listings confirm the cable meets safety standards for sustained operation at its full 10 A rating. RoHS and REACH compliant materials keep the assembly suitable for regulated environments. The heavy‑duty 18 AWG construction resists heat buildup during long‑term use.
Highlights
- Extend power reach for flexible equipment placement
- Connect servers to PDU or UPS in data centres
- Blue colour enables quick identification in dense racks
- Fully moulded 18 AWG construction resists daily wear
- UL, cUL and CSA certified for safety compliance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-02208-BU |
| Type | Power Extension Cable |
| Color | Blue |
| Length | 8 ft. |
| Connector Number | 2 |
| Connector Detail | IEC-60320-C14 to IEC-60320-C13 |
| Specifications | Connector A: IEC-60320-C14 Connector B: IEC-60320-C13 Conductor: UL SJT 18 AWG. x 3C Amp/Voltage Rating: 10A/250V |
| Wire Gauge | 18 AWG |
| Conductor | UL SJT 18 AWG. x 3C |
| Features | Extend the length of an existing power cord for more flexibility. Connect computer equipment to a PDU or UPS in data center. Colored cord is designed for easy identification in a high density data environment. This heavy duty 18 AWG power cord is fully molded for durability. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.30 kg |
| Package size | 191 × 76 × 25 mm |
Questions about this item
How much continuous current can the 18 AWG conductors carry before they become the limiting factor?
The 18 AWG SJT conductors are rated for 10 A at 250 V, so that is the maximum sustained load the cord can handle.
Does the fully moulded C14-to-C13 cord generate noticeable heat or noise when powering a server all day?
A passive cable produces no noise; at or below its 10 A rating the 18 AWG conductors run only slightly warm under continuous use.
What equipment must already have IEC-60320-C14 inlets and C13 outlets for this blue extension to connect?
You need a device with a C14 inlet (typical PSU or PDU) and a source with a C13 outlet (UPS, PDU or wall cord) to plug each end into.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114711BTC
In stock
