Nippon Labs
Nippon Labs 30POW-10W1-02204-BU computer power extension cord 4 ft blue C14 to C13 18 AWG 10A 250V
Blue 4 ft C14-to-C13 extension cord extends power connections for rack equipment, rated 10 A at 250 V with 18 AWG conductors
- TypePower Extension Cable
- ColorBlue
- Length4 ft.
- Connector Number2
- Connector DetailIEC-60320-C14 to IEC-60320-C13
- SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Conduc
- Extend power reach for flexible equipment placement
- Connect servers to PDU or UPS in data centres
- Blue colour enables quick identification in dense racks
- Fully moulded 18 AWG construction resists wear and damage
- UL, cUL listed and CSA approved for safety compliance
Power Extension Cord For Data Centres
This 4 ft blue cord extends an existing IEC C13 connection using a C14 plug and C13 socket. It suits server racks and network cabinets where extra reach is needed between equipment and a PDU or UPS. The coloured jacket helps identify circuits in dense installations. It is not for builders who need a longer domestic mains lead or a different connector type.
Thermals Noise And Power Draw
The UL SJT 18 AWG three-conductor cable is rated for 10A at 250V and carries UL, cUL and CSA approvals. In normal operation the fully moulded connectors run cool and the cord adds no audible noise. Power loss over the short length is negligible for typical rack-mounted devices drawing well within the rated current.
Sustained Load Behaviour
Under continuous load the 18 AWG conductors remain within their temperature rating thanks to the SJT insulation and robust moulding. The blue colour coding stays legible after prolonged use in warm aisles. All materials comply with RoHS and REACH directives. The cord does not suit applications that exceed the 10A rating or require a heavier gauge.
Highlights
- Extend power reach for flexible equipment placement
- Connect servers to PDU or UPS in data centres
- Blue colour enables quick identification in dense racks
- Fully moulded 18 AWG construction resists wear and damage
- UL, cUL listed and CSA approved for safety compliance
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-02204-BU |
| Type | Power Extension Cable |
| Color | Blue |
| Length | 4 ft. |
| Connector Number | 2 |
| Connector Detail | IEC-60320-C14 to IEC-60320-C13 |
| Specifications | Connector A: IEC-60320-C14 Connector B: IEC-60320-C13 Conductor: UL SJT 18 AWG. x 3C Amp/Voltage Rating: 10A/250V |
| Wire Gauge | 18 AWG |
| Conductor | UL SJT 18 AWG. x 3C |
| Features | Extend the length of an existing power cord for more flexibility. Connect computer equipment to a PDU or UPS in data center. Colored cord is designed for easy identification in a high density data environment. This heavy duty 18 AWG power cord is fully molded for durability. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.16 kg |
| Package size | 191 × 76 × 51 mm |
Questions about this item
How do I install the C14-to-C13 extension cord and what step do people often get wrong?
Plug the C14 end into the PDU or UPS outlet and the C13 end into the device inlet; the common mistake is reversing the connectors so the keyed notch does not align.
What maintenance or replacement will the 18 AWG SJT cord need later?
Inspect the fully moulded C13 and C14 ends for cracking or discolouration; replace the cord if the jacket shows heat damage or the pins become loose.
What limit appears first when the cord runs continuously at 10 A 250 V?
The 18 AWG conductors reach their 10 A rating first, so sustained loads above that will cause the cable to overheat before any connector limit is hit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115247BTC
In stock
