We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 ft power extension cord with C14 to C13 moulded connectors

Nippon Labs

Nippon Labs 30POW-10W1-02203 18 AWG C13/C14 3 ft computer power extension cord

SKU CH-TGYE-56K37 MPN 30POW-10W1-02203

Extends an existing power cord with a 3 ft 18 AWG IEC C14 to C13 cable rated 10 A / 250 V, UL and cUL listed

  • TypeAC Power Extension Cable
  • ColorBlack
  • Length3 ft.
  • Connector Number2
  • Connector DetailIEC-60320-C14 to IEC-60320-C13
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Conduc
  • Extend cord reach for flexible placement with a 3 ft length
  • Connect servers to PDU or UPS using IEC C14 to C13 connectors
  • Handle 10 A at 250 V with 18 AWG SVT conductors
  • Fully moulded heavy-duty build resists daily wear
  • UL, cUL and CSA approved meeting RoHS and REACH directives

Purpose and fit

This Nippon Labs extension cord adds three feet to an existing IEC C13 power lead using an 18 AWG SVT cable rated at 10 A and 250 V. It is built for connecting servers, workstations or network gear to a PDU or UPS in a rack or desk setup.

Who it suits and who it does not

Installers who need a short, fully moulded jumper with C14 to C13 ends will find it a direct fit. Buyers who need a longer reach, a different connector style or a higher current rating should look at other options.

Deciding specification

The cable uses 18 AWG conductors and carries UL, cUL and CSA approvals for 10 A at 250 V, making the ampacity and safety listings the key figures to match against your equipment requirements.

Highlights

  • Extend cord reach for flexible placement with a 3 ft length
  • Connect servers to PDU or UPS using IEC C14 to C13 connectors
  • Handle 10 A at 250 V with 18 AWG SVT conductors
  • Fully moulded heavy-duty build resists daily wear
  • UL, cUL and CSA approved meeting RoHS and REACH directives

Specifications

BrandNippon Labs
Model30POW-10W1-02203
TypeAC Power Extension Cable
ColorBlack
Length3 ft.
Connector Number2
Connector DetailIEC-60320-C14 to IEC-60320-C13
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Conductor: UL SVT 18 AWG. x 3C
Amp/Voltage Rating: 10A/250V
Cable Color: Black Color
Wire Gauge18 AWG
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 18 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.14 kg
Package size127 × 51 × 25 mm

Questions about this item

How do I connect the C14 and C13 ends to extend my existing power cable?

Plug the IEC-60320-C14 male end into your device's C13 inlet, then insert your current cord's C13 plug into the cable's C13 female end for a secure 3 ft extension.

When should I replace this 18 AWG extension cord?

Replace it if the fully moulded connectors show cracked insulation, bent pins, or the black SVT jacket becomes brittle, as the UL and cUL listing only covers intact construction.

What is the maximum continuous load this 10 A rated cord can handle?

The 18 AWG conductors are rated for 10 A at 250 V, so sustained draw above 10 A will exceed the cable's certified limit and cause overheating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.