We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2 ft power extension cord with C14 to C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-02202 2 ft C14-C13 18 AWG computer power extension cord

SKU CH-1BBJ-0FFC3 MPN 30POW-10W1-02202

Two-foot C14-to-C13 extension cord rated 10 A at 250 V with 18 AWG conductors for PDU or UPS connections

  • TypeAC Power Extension Cable
  • ColorBlack
  • Length2 ft.
  • Connector Number2
  • Connector DetailIEC-60320-C14 to IEC-60320-C13
  • SpecificationsConnector A: IEC-60320-C14 Connector B: IEC-60320-C13 Conduc
  • Extend reach by two feet with C14 to C13 connectors
  • 18 AWG conductors rated for 10A at 250V
  • Fully moulded SVT jacket resists daily wear
  • UL, cUL and CSA certified for safe operation
  • RoHS and REACH compliant materials used throughout

Extension cord for rack equipment

The Nippon Labs 30POW-10W1-02202 adds two feet of reach to an existing C13 power cable. It connects a device with a C14 inlet to a PDU or UPS outlet in a rack or data‑center cabinet.

Rated for 10 A at 250 V

The 18 AWG SVT conductors carry up to ten amps at 250 volts, suitable for typical servers, switches and storage units. It is not intended for loads that exceed the 10 A rating or for permanent installation in place of fixed wiring.

Fully moulded C14 to C13 ends

Both connectors are fully moulded for strain relief and durability in dense racks. The short two‑foot length reduces cable clutter but cannot bridge larger gaps between rack PDUs and distant equipment. UL, cUL and CSA approved with RoHS and REACH compliant materials.

Highlights

  • Extend reach by two feet with C14 to C13 connectors
  • 18 AWG conductors rated for 10A at 250V
  • Fully moulded SVT jacket resists daily wear
  • UL, cUL and CSA certified for safe operation
  • RoHS and REACH compliant materials used throughout

Specifications

BrandNippon Labs
Model30POW-10W1-02202
TypeAC Power Extension Cable
ColorBlack
Length2 ft.
Connector Number2
Connector DetailIEC-60320-C14 to IEC-60320-C13
SpecificationsConnector A: IEC-60320-C14
Connector B: IEC-60320-C13
Conductor: UL SVT 18 AWG. x 3C
Amp/Voltage Rating: 10A/250V
Cable Color: Black Color
Wire Gauge18 AWG
FeaturesExtend the length of an existing power cord for more flexibility.
Connect computer equipment to a PDU or UPS in data center.
This heavy duty 18 AWG power cord is fully molded for durability.
UL, cUL listed and CSA approved.
All relevant materials are complied with RoHS and REACH directive.
Shipping weight0.11 kg
Package size127 × 51 × 25 mm

Questions about this item

Will the C14 plug on this 18 AWG cord fit the C13 inlet on my older server PSU?

Yes, the IEC-60320-C14 connector on one end mates directly with a standard C13 inlet, so it will connect to your existing power supply without an adapter.

How can I verify the cord is rated for the 10 A load my UPS draws?

The cable jacket is marked UL SVT 18 AWG x 3C and the moulded connectors carry UL, cUL and CSA approvals for 10 A at 250 V, confirming the rating.

Does the package include any mounting hardware or cable ties for rack installation?

The box contains only the 2 ft black extension cord with moulded C14 and C13 ends; rack-mount clips or ties are not supplied and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.