Nippon Labs 30POW-10W1-01202-RD computer power cord 2 ft red 18 AWG NEMA 5-15P to C13
- Power
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Nippon Labs
Red 4 ft power cord connects devices with a C14 inlet to a NEMA 5-15P outlet at 10A, 125V using 18 AWG SJT conductors
This Nippon Labs power cord is a 4 ft red cable built with 18 AWG SJT conductors and terminated with a NEMA 5-15P plug on one end and an IEC-60320-C13 connector on the other. It is rated for 10 A at 125 V and carries UL, cUL and CSA approvals with RoHS and REACH compliance. The fully moulded construction is intended for durability in daily use.
It fits devices that have an IEC-60320-C14 inlet such as monitors, desktop computers, printers, scanners, TVs and sound systems. The red jacket helps identify the cord in a busy power strip or rack. It is not suitable for equipment that requires a different inlet type or a higher current rating than 10 A.
The critical figure is the 10 A 125 V rating combined with the 18 AWG conductor size; if the connected device draws more current or uses a non-C14 inlet this cord will not be appropriate.
| Brand | Nippon Labs |
|---|---|
| Model | 30POW-10W1-01204-RD |
| Type | Power |
| Color | Red |
| Length | 4 ft. |
| Connector Number | 2 |
| Connector Detail | NEMA 5-15P to IEC-60320-C13 10A/125V |
| Specifications | NEMA 5-15P to IEC-60320-C13 18 AWG., SJT, 10A, 125V |
| Wire Gauge | 18 AWG |
| Conductor | SJT 18 AWG. x 3C |
| Features | Typically used for monitors, computers, printers, scanners, TVs, sound systems, and many more devices and appliances that have the IEC-60320-C14 inlet. Ideal solution for replacing damaged, overused or missing power cords. This heavy duty 18 AWG power cord is fully molded for durability. Colored cord is designed for easy identification in a crowded surge protector or workstation. UL, cUL listed and CSA approved. All relevant materials are complied with RoHS and REACH directive. |
| Shipping weight | 0.45 kg |
| Package size | 152 × 152 × 102 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Replace the cord if the jacket shows cuts, the strain reliefs crack, the blades bend, or the C13 socket grips loosely — any of those indicate the 18 AWG conductors or moldings are no longer safe.
A continuous draw above 10 A at 125 V will reach the cord's rated limit before the 18 AWG SJT conductors or the NEMA 5-15P / IEC-60320-C13 connectors exceed their design capacity.
At the rated 10 A the 18 AWG SJT conductors warm slightly but remain within UL / cUL / CSA limits; the cord produces no audible noise and the red jacket aids visual identification in dense racks.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?