Nippon Labs
Nippon Labs 30FP-16FP-M4-LCLC-04 fibre optic cable OM4 LC/LC 4m
OM4 duplex multimode fibre cable with LC/LC connectors, 4 m length, supports 10 Gb up to 550 m and 40/100 Gb up to 150 m
- TypeFiber
- ColorBlue
- Length4m
- Connector Number2
- Connector DetailLC to LC
- SpecificationsFiber Mode: OM4, Multimode, 50 / 125 Fiber Count: 2 Strands
- OM4 multimode supports 10 Gb up to 550 m and 40/100 Gb up to 150 m
- Low insertion loss under .3 dB and return loss above 35 dB ensures signal integrity
- LC duplex connectors enable high-density patch-panel deployments
- OFNR riser-rated PVC jacket allows safe vertical runs between floors
- 4 m aqua cable with 2.0 mm OD simplifies routing in tight spaces
OM4 duplex multimode fibre cable
The Nippon Labs 30FP-16FP-M4-LCLC-04 is a four-metre duplex multimode cable built to OM4 50/125 specifications with LC/UPC connectors on both ends. It targets installers and network engineers who need reliable 10 Gb, 40 Gb or 100 Gb links in data-centre, campus or riser environments.
Riser-rated PVC jacket and compact LC connectors
A 2.0 mm aqua PVC jacket carries an OFNR riser rating for vertical runs between floors, while the small-form-factor LC ferrules suit high-density patch panels and transceivers. Two strands with UPC polish give insertion loss below .3 dB and return loss above 35 dB for consistent signal integrity.
Passive cable with no power or cooling requirements
As a purely passive optical assembly the cable draws no power, generates no heat and produces no acoustic noise. It supports 10 Gb Ethernet up to 550 metres and 40 Gb or 100 Gb up to 150 metres, with an effective modal bandwidth of 4700 MHz/km at 850 nm for headroom in demanding links.
Highlights
- OM4 multimode supports 10 Gb up to 550 m and 40/100 Gb up to 150 m
- Low insertion loss under .3 dB and return loss above 35 dB ensures signal integrity
- LC duplex connectors enable high-density patch-panel deployments
- OFNR riser-rated PVC jacket allows safe vertical runs between floors
- 4 m aqua cable with 2.0 mm OD simplifies routing in tight spaces
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | 30FP-16FP-M4-LCLC-04 |
| Type | Fiber |
| Color | Blue |
| Length | 4m |
| Connector Number | 2 |
| Connector Detail | LC to LC |
| Specifications | Fiber Mode: OM4, Multimode, 50 / 125 Fiber Count: 2 Strands Polish Type: UPC to UPC Insertion Loss: < 0.3 dB Return Loss: > 35 dB Jacket OD: 2.0 mm Jacket Material: PVC Jacket Color: Aqua |
| Shipping weight | 0.77 kg |
| Package size | 203 × 76 × 51 mm |
Questions about this item
What bandwidth does the OM4 multimode fibre actually support at 850 nm?
The cable is rated for an Effective Modal Bandwidth of 4700 MHz/km at 850 nm, enabling 10 Gb links up to 550 m and 40 Gb or 100 Gb links up to 150 m.
Will the 2.0 mm PVC jacket and LC connectors fit a standard high-density patch panel?
Yes, the 2.0 mm aqua PVC jacket and duplex LC/UPC connectors are designed for high-density panels and riser-rated OFNR pathways.
How do I clean the LC/UPC end faces before plugging them in?
Use a lint-free wipe and isopropyl alcohol on each ferrule tip, then inspect with a fibre scope; any residue left on the UPC polish will raise insertion loss above the rated 0.3 dB.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115349BTC
In stock
