We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular ABS charger with dual USB ports, LED voltmeter, on-off switch, rubber caps, SAE cable, for 7/8in handlebar

Nilight Motorcycle Charger 12V Voltmeter SAE USB 10A Fuse 6.8A Dual QC3.0 7/8in Handlebar

SKU CH-YZ2Y-QN312

A handlebar-mounted charger with a built-in voltmeter, independent on/off switch, and dual QC 3.0 USB ports delivering up to 6.8A total output

  • Charges two devices at once with dual QC 3.0 ports
  • Real-time battery monitoring via built-in LED voltmeter
  • Prevents battery drain with independent on/off power switch
  • Weatherproof rubber cover protects ports and switch from rain
  • Includes fused SAE cable with 10 A protection

Motorcycle charger with 7/8in handlebar mount

This Nilight charger mounts on a 7/8in handlebar and provides dual QC3.0 USB ports for phones or tablets. It delivers up to 6.8A total output across 5V 3.4A, 9V 2.5A and 12V 2A profiles. An integrated LED voltmeter shows real-time battery voltage. A waterproof rubber cap protects the ports and switch from rain and dust.

Check your vehicle voltage and wiring before fitting

The unit is designed for 12V electrical systems only. Verify that your bike or ATV runs a 12V battery and that the SAE-to-O-ring harness can reach the battery terminals. The pigtail-to-SAE lead measures 42.5in and the SAE-to-O-ring section adds 4.53in, so confirm the combined length suits your routing. An inline 10A fuse is included in the harness for circuit protection.

Bundled SAE harness and fuse simplify installation

The package includes a fused SAE-to-O-ring cable that connects directly to the battery, removing the need for separate wiring. The 10A fuse safeguards the charger and vehicle wiring from overloads. A waterproof cover shields the USB ports and on/off switch when not in use, extending service life in all weather. The independent switch lets you cut power completely to prevent parasitic battery drain.

Highlights

  • Charges two devices at once with dual QC 3.0 ports
  • Real-time battery monitoring via built-in LED voltmeter
  • Prevents battery drain with independent on/off power switch
  • Weatherproof rubber cover protects ports and switch from rain
  • Includes fused SAE cable with 10 A protection

Specifications

BrandNilight

Questions about this item

What cables and connectors come with the charger and what must be sourced separately?

The kit includes a fused SAE-to-ring harness 4.53 inches long and a 42.5-inch pigtail to the SAE receptacle; a device USB cable is not supplied.

Which charging profile should I expect from the dual USB ports?

Both ports share 5 V 3.4 A, 9 V 2.5 A and 12 V 2 A via QC 3.0, so each device draws the profile its own protocol negotiates.

What does the 6.8 A total rating mean when two phones are plugged in?

The combined output is capped at 6.8 A; each port can deliver up to 3.4 A at 5 V, so two fast-charge phones will share that budget.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.