We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NGS

NGS Hacker 3.0 USB 3.0 to RJ45 Adapter

SKU CH-FSBZ-JANN5

A 15 cm USB 3.0 to RJ45 adapter adds gigabit Ethernet to laptops, works plug-and-play with Windows, macOS and Linux, and draws power from the USB port

  • Adds Gigabit Ethernet through a USB 3.0 port
  • Up to 1000 Mbit/s average transfer speeds
  • Works with Windows, Mac OS and Linux systems
  • 15 cm cable keeps setup compact and portable
  • Powered entirely by the USB connection, no external adapter needed

USB 3.0 to Gigabit Ethernet Adapter

The NGS Hacker 3.0 adds a wired RJ45 network port to PCs and laptops through a USB 3.0 connection. It is aimed at users whose device lacks an Ethernet socket or needs a replacement for a damaged port. The compact 15 cm dongle draws power directly from the USB port and requires no external supply. Plug-and-play operation makes it practical for travel or permanent desk use.

Thermals, Noise and Power

The adapter has no moving parts and therefore produces no audible noise during operation. Power is supplied entirely by the host USB port, eliminating the need for a separate adapter or cable. Normal use sees the device run cool because power draw is limited to what the USB interface provides. This passive design suits quiet offices and mobile setups alike.

1000 Mbps Maximum Throughput

The single specification that decides suitability is the rated data transfer speed of up to 1000 Mbit/s over USB 3.0. Buyers who need sustained multi-gigabit throughput or link aggregation will find this adapter insufficient. Compatibility covers Windows 10, 8.1, 8, 7, Vista, XP, Mac OS 10.6 to 10.11 and Linux with IEEE 802.3, 802.3u and 802.3ab support.

Highlights

  • Adds Gigabit Ethernet through a USB 3.0 port
  • Up to 1000 Mbit/s average transfer speeds
  • Works with Windows, Mac OS and Linux systems
  • 15 cm cable keeps setup compact and portable
  • Powered entirely by the USB connection, no external adapter needed

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the NGS Hacker 3.0 USB 3.0 to RJ45 Adapter, and what step is often missed?

Plug the USB 3.0 connector into a free port on your PC or laptop, then connect an Ethernet cable to the RJ45 jack. The step often missed is ensuring the port is USB 3.0; using USB 2.0 or 1.1 limits speed to below the 1000 Mbit/s capability.

What maintenance or replacement will this adapter need later?

No scheduled maintenance is required. The adapter draws power from the USB port with no external supply. If the USB connector or RJ45 port becomes physically damaged, or the cable frays after repeated bending, replace the whole unit.

What limit appears first during sustained heavy transfers?

The USB 3.0 interface caps sustained throughput at the adapter's rated 1000 Mbit/s. In practice, thermal throttling inside the compact 15 cm dongle or the host controller's own limits will reduce real-world speeds before the Gigabit Ethernet link saturates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.