We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Netgear 10 metre direct attach SFP twinaxial cable

Netgear Inc.

Netgear Inc. AXC7610-10000S 10m network ethernet cable

SKU CH-J39Z-Z5P1V MPN AXC7610-10000S

A 10-metre SFP+ Direct Attach copper twinaxial cable for 10G links between switches and servers

  • CatTwinaxial
  • Length32.81 ft.
  • 10-metre reach connects rack-mounted SFP+ gear without extra transceivers
  • Twinaxial copper construction keeps latency low for 10 GbE links
  • Active SFP+ connectors maintain signal integrity over the full 32.81 ft length
  • Compatible with Netgear AXC765 through AXC7620 cable families for consistent deployments
  • Direct-attach design removes separate module cost and simplifies cable management

Direct Attach SFP+ Cable for 10G Networks

This ten-metre twinaxial cable connects SFP+ equipped switches, servers or storage appliances in a 10G Ethernet link. It integrates active SFP+ compatible connectors with a copper twin-axial assembly for a low-latency, energy-efficient connection. The cable is suited to data-centre racks or campus wiring where fibre is not required.

Replaces Passive Copper at Longer Reach

Passive direct-attach copper typically stops at five metres; this active design extends reliable operation to ten metres and the family reaches twenty metres. The upgrade is worth it when the link distance exceeds the passive limit but a full transceiver-plus-fibre deployment adds unnecessary cost and power draw.

Handles Rack-to-Rack and Row-to-Row Runs

At 32.81 ft the cable comfortably spans adjacent racks or rows in a standard aisle. It runs out when the path exceeds ten metres or when the installation demands fibre immunity to electromagnetic interference, at which point the longer active-optical variants in the same series take over.

Highlights

  • 10-metre reach connects rack-mounted SFP+ gear without extra transceivers
  • Twinaxial copper construction keeps latency low for 10 GbE links
  • Active SFP+ connectors maintain signal integrity over the full 32.81 ft length
  • Compatible with Netgear AXC765 through AXC7620 cable families for consistent deployments
  • Direct-attach design removes separate module cost and simplifies cable management

Specifications

BrandNetGear
CatTwinaxial
Length32.81 ft.
Shipping weight0.58 kg
Package size254 × 241 × 51 mm

Questions about this item

What SFP+ port spacing does the 10 m AXC7610-10000S cable require?

The cable plugs directly into two SFP+ slots with no extra brackets; standard SFP+ pitch on switches and servers is all that is needed.

Which end of the twinaxial assembly inserts first during installation?

Both ends are identical active SFP+ connectors; insert either end into the first device, then the other end into the second device until each latch clicks.

When should the 10 m direct-attach cable be replaced?

Replace it if link errors appear, the latch tabs break, or the cable jacket shows kinks or cuts that could affect the twinaxial conductors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.