Netgear Inc.
Netgear Inc. 600045110000S omnidirectional MIMO network antenna
Improves 3G, 4G and 5G reception for modems and hotspots with TS-9 or SMA connectors, extending coverage in buildings, vehicles and remote sites
- Boosts 3G/4G/5G reception in fringe areas
- Extends indoor coverage for modems and hotspots
- Works with TS-9 and SMA connector types
- Simple plug-and-play setup with no software
- Omnidirectional MIMO design captures signals from all directions
Netgear omnidirectional MIMO antenna
This Netgear omnidirectional MIMO antenna connects to 3G, 4G or 5G modems and mobile hotspots using TS-9 or SMA connectors. It is designed for users who need stronger reception inside buildings, vehicles or remote sites where coverage is weak. Installation is straightforward and requires no software. The antenna helps extend usable network range in fringe areas.
Passive operation with no power draw
The antenna is a passive component, so it adds no noise and draws no power during normal use. It simply couples to the modem's existing radio hardware without active electronics. Thermal output is therefore negligible and there are no moving parts to generate sound. It operates silently within the environmental limits of the host device.
TS-9 and SMA connector compatibility
The single specification that decides fit is the connector type: this antenna terminates in TS-9 and SMA plugs. Buyers whose modem or hotspot uses a different antenna port cannot use this unit without an adapter. No other interface or protocol is involved, so verifying the device's external antenna sockets is the only compatibility check required.
Highlights
- Boosts 3G/4G/5G reception in fringe areas
- Extends indoor coverage for modems and hotspots
- Works with TS-9 and SMA connector types
- Simple plug-and-play setup with no software
- Omnidirectional MIMO design captures signals from all directions
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the Netgear 600045110000S antenna to a modem that only has TS-9 ports?
The antenna includes adapters for both TS-9 and SMA connectors; attach the TS-9 pigtail to each modem port and tighten by hand until snug, avoiding over-torque which can crack the modem jack.
Will the antenna cables or connectors degrade and need replacement after extended outdoor exposure?
The cables are rated for indoor, vehicle and remote-site use; UV-resistant jackets and weather-sealed TS-9/SMA interfaces typically last several years before any connector corrosion or jacket cracking requires replacement.
At what signal level does the omnidirectional MIMO array stop improving throughput in a sustained fringe-area session?
The antenna provides gain across 3G, 4G and 5G bands, but once the received signal drops below the modem’s minimum sensitivity threshold, no passive antenna can recover usable throughput.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
