We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld network tester kit with large touchscreen display

NETALLY HH TOOLS

NETALLY HH TOOLS LinkRunner AT 3000 Kit Network Cable Tester

SKU CH-TCWQ-D89AM

Handheld kit validates copper and fibre links from 10 Mbps to 10 Gbps, tests PoE up to 90 W, identifies switch ports and VLANs, and runs full AutoTest diagnostics

  • Comprehensive AutoTest validates link connectivity and services including DHCP and DNS
  • Verifies link speed from 10 Mbps to 10 Gbps with NBASE-T and Multigigabit 2.5G, 5G, and 10 Gbps detection
  • Identifies nearest switch name and port via CDP/LLDP/EDP including VLANs and monitors VLAN trunk traffic
  • Validates PoE switching and cabling up to 90W 802.3bt with TruePower loading
  • Advanced twisted-pair and fiber tests for length, wiremap, faults, signal strength, and SFP diagnostics

Frontline Copper and Fiber Validation

The LinkRunner AT 3000 Kit is a handheld network cable tester built for frontline technicians who must validate copper and fiber Ethernet links quickly. It runs a comprehensive AutoTest that checks link connectivity, DHCP, DNS and switch discovery in a single pass. The large touchscreen presents results clearly for rapid decision-making on site.

Test Integration and Optional Expansion

The unit verifies link speed and duplex from 10 Mbps through 1 Gbps and detects NBASE-T plus Multigigabit 2.5G, 5G and 10G links. It identifies the nearest switch name, port and VLANs via CDP, LLDP and EDP while monitoring VLAN trunk traffic. Optional WireView adapters, a tone generator and a USB Wi-Fi/Bluetooth adapter extend cable location and remote control capabilities.

Sustained PoE Loading and Cloud Reporting

TruePower loading validates Power over Ethernet switching and cabling up to 90W under the 802.3bt standard during extended test sessions. Fiber optic link signal strength and SFP diagnostics are measured alongside twisted-pair length, wiremap and fault detection. Test results upload to the Link-Live platform for automated reporting, management and remote tester control over long shifts.

Highlights

  • Comprehensive AutoTest validates link connectivity and services including DHCP and DNS
  • Verifies link speed from 10 Mbps to 10 Gbps with NBASE-T and Multigigabit 2.5G, 5G, and 10 Gbps detection
  • Identifies nearest switch name and port via CDP/LLDP/EDP including VLANs and monitors VLAN trunk traffic
  • Validates PoE switching and cabling up to 90W 802.3bt with TruePower loading
  • Advanced twisted-pair and fiber tests for length, wiremap, faults, signal strength, and SFP diagnostics

Specifications

No published specifications for this item yet.

Questions about this item

What is the highest link speed the LinkRunner AT 3000 can verify?

The tester verifies link speed and duplex for 10/100 Mbps and 1 Gbps, with detection of NBASE-T and Multigigabit 2.5G, 5G, and 10 Gbps links.

How much Power over Ethernet can the LinkRunner AT 3000 validate under load?

It validates PoE switching and cabling up to 90W 802.3bt using TruePower loading to confirm actual power delivery.

Which adapter is required to locate cable endpoints with the LinkRunner AT 3000?

Optional WireView adapters are required to locate cable endpoints, used alongside the built-in analog or digital tone generator.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.