We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 UDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM MD19200-628K2 32GB (2x16GB) DDR4 2400 CL17 desktop RAM

SKU CH-6AA2-VM0J9

A 32 GB dual-channel kit of 2400 MHz DDR4 UDIMM memory in two 16 GB modules with CL17 latency and 1.2 V operation

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo

Capacity 32GB (2 x 16GB)

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed rated at PC4-19200
  • CL17 CAS latency for responsive timing
  • 2 V operation reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop boards

Kit configuration and target use

This NEMIX RAM kit supplies 32 GB of DDR4 memory in two 16 GB modules. The dual-channel pair is built for standard desktop boards that accept 288-pin UDIMM slots and do not require ECC or registered DIMMs. It suits office workstations, home PCs and light content-creation rigs that need reliable capacity without overclocking headroom.

Behaviour under sustained load

Running at 2400 MT/s with CL17 timings and a fixed 1.20 V supply, the modules deliver steady throughput during long compile jobs, virtual-machine workloads or extended browsing sessions. The unbuffered design keeps latency predictable, while the 2Rx8 organisation helps maintain bandwidth when all ranks are active for hours at a time.

Compatibility checks before ordering

Verify that your motherboard supports DDR4 2400 non-ECC UDIMM memory and has two free 288-pin slots. Confirm the board can operate at 1.20 V without manual voltage adjustment. Ensure the CPU memory controller is rated for at least 2400 MT/s so the kit runs at its labelled speed without down-clocking.

Highlights

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed rated at PC4-19200
  • CL17 CAS latency for responsive timing
  • 2 V operation reduces power draw
  • 288-pin unbuffered non-ECC UDIMM fits standard desktop boards

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD19200-628K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this kit fit a standard desktop motherboard that takes 288-pin DDR4 UDIMM modules?

Yes, the kit uses 288-pin DDR4 UDIMM form factor at 1.20 V, which matches standard desktop DIMM slots.

My board only runs memory at 2400 MT/s — will these modules work without manual BIOS changes?

The modules are rated for DDR4 2400 (PC4-19200) at CL17, so they will operate at that speed on a board limited to 2400 MT/s.

Does the 2Rx8 organisation on each 16 GB module affect compatibility with consumer chipsets?

2Rx8 is a common density for 16 GB DDR4 UDIMMs and is supported by most consumer desktop chipsets that accept 32 GB kits.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.