We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR4 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 48GB (6x8GB) DDR4 2933 ECC RDIMM Dell Precision 7920 memory upgrade

SKU CH-FFAA-223V4

Six 8 GB DDR4 registered ECC modules totalling 48 GB at 2933 MHz CL21 for the Dell Precision 7920

  • Capacity48GB (6 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 48 GB total capacity across six 8 GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • ECC registered design protects data integrity
  • Low 1.20 V operation reduces power draw
  • Validated for Dell Precision 7920 workstation compatibility

Dell Precision 7920 memory kit

This 48 GB kit contains six 8 GB DDR4 2933 ECC RDIMM modules built for the Dell Precision 7920 rack or tower workstation. Registered buffering and error-correcting code protect data integrity in professional workloads. The modules run at 1.2 V with CL21 latency and fit standard 288-pin DDR4 slots. Buyers needing non-ECC or unbuffered DIMMs for consumer boards should look elsewhere.

Registered ECC RDIMM at 2933 MT/s

The single specification that determines fit is the registered ECC RDIMM design running at DDR4 2933 (PC4-23400). Only systems that explicitly support registered error-correcting modules at this speed will recognise the full 48 GB capacity. Workstations requiring load-reduced, unbuffered or faster DDR4 modules cannot use this kit.

Six matched modules simplify installation

The package delivers six identical 1Rx8 modules pre-configured as a matched set, removing the need to source individual sticks or verify rank compatibility. No heat spreaders are included, so airflow clearance remains unchanged. No additional software, cables or brackets are supplied.

Highlights

  • 48 GB total capacity across six 8 GB modules
  • DDR4 2933 speed rated at PC4-23400 bandwidth
  • ECC registered design protects data integrity
  • Low 1.20 V operation reduces power draw
  • Validated for Dell Precision 7920 workstation compatibility

Specifications

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-818K6
Capacity48GB (6 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content48GB (6X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How does the 2933 MT/s speed translate to real-world throughput in a Precision 7920?

The kit runs at DDR4 2933 with a PC4-23400 rating, delivering up to the JEDEC peak transfer rate per module at that data rate.

What does the PC4-23400 rating cap in practice?

PC4-23400 marks the JEDEC peak transfer rate for DDR4 2933; the memory controller in the Precision 7920 governs the actual sustained bandwidth.

Will the 288-pin registered DIMMs fit the Precision 7920 memory slots?

Yes, the 288-pin DDR4 RDIMM form factor matches the Precision 7920 DIMM sockets; the kit includes six 8 GB modules for the system's six-channel architecture.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.