We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module, 288 pins, no heat spreader, 32GB 5600 CL46 1.10V ECC registered

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 1.10V 1Rx4 ECC RDIMM server RAM

SKU CH-A9M2-68GJE

32GB DDR5 5600 ECC registered server memory module with CL46 latency at 1.10V in a 288-pin RDIMM form factor

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Capacity 32GB

  • 32GB capacity expands server memory for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive tasks
  • CL46 latency supports responsive performance at rated frequency
  • 10V operation reduces power draw per module
  • ECC registered design detects and corrects errors for data integrity

NEMIX RAM 32GB DDR5 5600 ECC RDIMM

This NEMIX RAM module provides 32GB of DDR5 5600 registered ECC memory for server and workstation platforms. It operates at 1.10V with a CL46 latency and uses a 1Rx4 organisation on a 288-pin RDIMM form factor. The module is built with major OEM chips from Samsung, Micron or Hynix and ships without a heat spreader.

Suited for registered ECC slots only.

This memory fits motherboards that support DDR5 registered ECC RDIMMs and will not work in slots wired for unbuffered UDIMMs or non-ECC modules. Systems requiring a heat spreader for thermal management or a different rank configuration should select an alternative part. Buyers needing a lower voltage than 1.10V must verify platform support before purchase.

Single rank 1Rx4 organisation at CL46

The module presents a single 1Rx4 rank to the memory controller, which determines how the board populates channels and achieves maximum capacity. This rank structure, combined with the CL46 timing at 5600 MT/s, is the key specification that decides compatibility with a given server or workstation motherboard.

Highlights

  • 32GB capacity expands server memory for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive tasks
  • CL46 latency supports responsive performance at rated frequency
  • 10V operation reduces power draw per module
  • ECC registered design detects and corrects errors for data integrity

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-314K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Memory Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What DDR5 speed and CAS latency does this RDIMM run at?

This module operates at DDR5 5600 with a CAS latency of CL46, delivering PC5 44800 bandwidth.

Does the 288-pin DDR5 RDIMM fit my server's memory slots?

The stick uses the standard 288-pin DDR5 RDIMM form factor, so it installs in any server board that accepts registered DDR5 DIMMs.

How do I install this ECC registered module and what step is often missed?

Power down, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then enable ECC in the BIOS — skipping the BIOS step is the common mistake.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.