NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR4 3200 CL22 ECC RDIMM ThinkMate memory upgrade
Eight 128 GB DDR4-3200 registered ECC modules deliver 1 TB of server memory for ThinkMate towers
- Capacity1TB (8 x 128GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 1TB capacity for demanding server workloads
- Eight 128GB modules fill all channels
- DDR4 3200 speed with CL22 latency
- ECC registered design protects data integrity
- 20V operation reduces power draw
1 TB DDR4 ECC RDIMM kit for ThinkMate towers
This eight-module kit delivers one terabyte of registered DDR4-3200 memory built for ThinkMate TWX-QS8-14E3 and TWX-QS8-24E3 tower servers. Each 128 GB stick runs at 1.20 V with CL22 latency and 4Rx4 organisation. The modules are validated for mission-critical workloads that demand error-correcting registered DIMMs.
Upgrade from smaller RDIMM sets
Replacing partial-population configurations with this matched 8 x 128 GB kit removes interleaving mismatches and ensures full-channel bandwidth. The jump is worth it when your current memory ceiling forces paging during virtualisation, database or analytics jobs and the platform supports 4Rx4 registered modules at 3200 MT/s.
Handles large VM fleets.
One terabyte provides headroom for dozens of concurrent virtual machines or multi-terabyte working sets without swapping. The limit appears when the CPU memory controller reaches its maximum supported rank count per channel or when the workload exceeds the bandwidth of DDR4-3200, at which point a platform move becomes necessary.
Highlights
- 1TB capacity for demanding server workloads
- Eight 128GB modules fill all channels
- DDR4 3200 speed with CL22 latency
- ECC registered design protects data integrity
- 20V operation reduces power draw
Specifications
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-744K8 |
| Capacity | 1TB (8 x 128GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 4Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 1TB (8X128GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Questions about this item
Does the 288-pin DDR4 RDIMM form factor fit the THINKMATE TWX-QS8-14E3 and TWX-QS8-24E3 tower servers?
Yes, the 288-pin DDR4 RDIMM modules are designed for the THINKMATE TWX-QS8-14E3 and TWX-QS8-24E3 tower servers and match the required registered DIMM slot specification.
What is the correct sequence for populating the eight 128 GB modules to avoid a boot failure?
Install the eight 128 GB modules in the slot order shown in the server manual, typically filling each channel evenly before adding a second rank, so the 4Rx4 organisation is recognised at POST.
When should the registered ECC RDIMMs be replaced if correctable error counts start climbing in the system logs?
Replace the modules when the platform firmware reports a sustained rise in correctable ECC errors or when memory diagnostics flag a specific 128 GB module as degraded.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



