We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 RDIMM module with black memory chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM 1Rx4 server RAM

SKU CH-0DJ6-MHHY4

16 GB DDR4-3200 ECC registered DIMM, CL22 at 1.2 V, 1Rx4 organisation, 288-pin, built with major-OEM chips for server stability

  • Capacity16GB
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Capacity 16GB

  • 16 GB ECC RDIMM for data integrity in servers
  • DDR4 3200 CL22 speed for responsive workloads
  • 2 V registered design lowers power draw
  • 1Rx4 Samsung Micron Hynix chips ensure stability
  • 288 pin DDR4 form factor fits standard slots

Server DDR4-3200 ECC RDIMM

This 16GB DDR4 registered module runs at 3200MT/s with CL22 latency and 1.20V operation. It targets administrators upgrading or expanding memory in servers and workstations that require ECC protection and registered signalling for multi-DIMM stability.

Upgrade from non-ECC or lower-speed DDR4

The jump is worthwhile when workloads demand error correction for data integrity or when the platform requires registered modules to populate all slots. Systems already running DDR4-3200 RDIMMs gain capacity without changing memory speed or voltage.

Tool-free DIMM installation

The 288-pin RDIMM seats in standard DDR4 server slots; no heat spreader means clearance is rarely an issue. The most common mistake is mixing registered and unbuffered modules or exceeding the motherboard's maximum rank-per-channel limit, which prevents the system from posting.

Highlights

  • 16 GB ECC RDIMM for data integrity in servers
  • DDR4 3200 CL22 speed for responsive workloads
  • 2 V registered design lowers power draw
  • 1Rx4 Samsung Micron Hynix chips ensure stability
  • 288 pin DDR4 form factor fits standard slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-614K1
Capacity16GB
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 ECC RDIMM Registered Server Memory Motherboard Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 288-pin DDR4 RDIMM fit my server motherboard's memory slots?

The module uses the standard 288-pin DDR4 RDIMM form factor, so it fits any server board with DDR4 RDIMM slots that support 3200 MT/s and registered ECC memory.

What BIOS setting or step is often missed when installing this registered ECC module?

After seating the DIMM firmly until the clips lock, enable ECC and registered mode in the BIOS; many builders forget to save the memory configuration before exiting setup.

When should I expect to replace this 16 GB 1Rx4 kit under normal server workloads?

DDR4 RDIMMs have no moving parts and run at 1.20 V; replacement is typically only needed if a DIMM fails diagnostics or capacity must be increased beyond 16 GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.